snugtot.

Parent terminal

Car seat ratings

Every child car seat NHTSA has rated for ease of use, 130 seats, with the stars for each mode: rear-facing, forward-facing and booster. Enter your child's weight and height and the list narrows to the seats they fit today. The stars say how easy a seat is to install and use correctly, which is where most mistakes happen; every seat on sale is certified to the same federal crash standard, so a 3-star seat is not a less safe seat.

130 of 130 seats

Booster

Baby Trend Protect 2-in-1

40–120 lb · up to 57" · model HB40E42A

Booster ★★★★★ 40–120 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations on the car seat showing how to convert the booster from highback mode to no-back mode.
  • The full picture of a child properly restrained in the child seat is not directly next to sizing information on the labeling.
  • The manual cannot be accessed while the car seat is installed in this mode and the child is in the car seat. The instruction manual storage may be difficult to find and use. The indication that the safest place in the vehicle for children is the rear seat is buried within a bulleted list. The warning that the safest place for children is the rear seat is not illustrated.

Infant

Britax B-Safe Gen 2

4–35 lb · up to 32" · model E1C732C

Rear-Facing ★★★★★ 4–35 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning, and loose parts may be generated during these processes.
  • LATCH attachments have buttons to depress for removal.
  • The instruction manual storage location may be difficult to find. Instructions for determining seat belt types are present but are incomplete.

Infant

Britax Cypress, Alpine Base

4–30 lb · up to 32" · model E1D124Y

Rear-facing ★★★★★ 4–30 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set up for the smallest occupant when it was removed from the packaging. Harness slots may be misaligned or small, which could cause confusion when adjusting the harness height. The harness must be rethreaded to adjust height for the child's growth. The harness must be taken out and rethreaded when cleaning the restraint
  • The seat belt path is not completely labeled.
  • A printed/molded line is present on the restraint that must be leveled to the ground.
  • The owner's manual was not attached to the seat when it was removed from its packaging. The manual cannot be accessed while the car seat is installed in this mode. The instruction manual storage location may be difficult to find. The user may find the manual storage difficult to use. The warning to avoid placing a rear-facing child restraint in front of an active airbag is buried within a bulleted list.

Combination

Britax Grow With You

25–120 lb · up to 63" · model E1C449H

Forward-Facing ★★★★★ 25–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations given on the car seat to show conversion to this mode from another mode of use.
  • The tether is not labeled in the diagrams showing overviews of the different methods of installation.
  • LATCH attachments have buttons to depress for removal. The storage locations for the LATCH belt and/or tether strap are not obvious and may be overlooked.
  • No complete illustration of a child in the car seat is shown next to height/weight information. The tether is not labeled in the illustrations depicting acceptable modes of installation. Instructions for determining seat belt types are present but are incomplete. The tether is initially stored and the owner's manual does not illustrate removal from the storage location.
Booster ★★★★★ 40–120 lb, to 63" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations given on the car seat to show conversion to this mode from another mode of use.
  • The warning against using a lap-only belt does not explicitly state that a lap-only belt may not be used.
  • The shoulder belt guide may allow unintentional slack to occur in the seat belt.
  • No complete illustration of a child in the car seat is shown next to height/weight information. The warning against using a lap-only belt is not illustrated in the seat belt routing/usage section, and the car seat is not depicted in a vehicle seat. The tether is not labeled in the illustrations depicting acceptable modes of installation.

Booster

Century Boost On

40–120 lb · up to 57" · model 2164226

Booster ★★★★★ 40–120 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The CRS was not fully assembled when removed from the packaging. The cup holders were not installed when removed from the box. The highback was not fully assembled. The conversion from highback to low back is simple, but there are no illustrations on the label. The cup holders need to be removed for cleaning, creating loose parts.
  • The shoulder belt positioning device requires the use of two hands, but the action of positioning is simple.
  • The manual storage system is obvious and easy to use, but the manual cannot be accessed in this mode.

Booster

Chicco GoFit

40–110 lb · up to 57" · model 4.07975E+12

Booster ★★★★★ 40–110 lb, to 57" · No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • Supplemental sizing information is given in text only on the labeling (not illustrated). There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. The warning against using a lap-only belt is not illustrated.
  • The shoulder belt guide requires two hands to use, but the action is simple.
  • The instruction manual cannot be accessed when the car seat is installed and the child is in the seat.

Booster

Clek Ozzi

40–120 lb · up to 57" · model OZ11U2

Booster ★★★★★ 40–120 lb, to 57" · No Back
Instructionsn/a
Labels★★★★★
Installing in the carn/a
Securing the child★★★★★
  • The belt routing path labeling is not contrasting from the car seat shell.
  • The instruction manual storage location cannot be accessed while the child is seated in the seat. The warning that the safest place for children is the rear seat is buried within text.

Booster

Cosco Top Side

40–100 lb · up to 57" · model BC030CMM

Booster ★★★★★ 40–100 lb, to 57" · No Back
Instructionsn/a
Labels★★★★★
Installing in the carn/a
Securing the child★★★★★
  • Supplemental sizing information is missing from labels. The belt routing path is not completely labeled.

Infant

Cybex Aton 2 Sensorsafe

4–35 lb · up to 30" · model 519003595

Rear-Facing ★★★★★ 4–35 lb, to 30" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth.
  • The belt path is not completely labeled.
  • The belt positioning feature/lock-off is simple to use, but the user must refer to the owner's manual for complete instructions. LATCH attachments have buttons to depress for removal.
  • The instruction manual storage location may be difficult to find and use, and it cannot be accessed while the child is secured in the seat. Instructions for determining seat belt types are present but are incomplete.

Infant

Cybex Aton G

4–35 lb · up to 32" · model Ocean Blue

Rear-Facing ★★★★★ 4–35 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • Supplemental sizing information is provided in text only. Illustrations are not directly next to the sizing information on the labeling. The label does not include illustrations or instructions on how to remove the lower anchors from storage.
  • The belt tensioner on the CRS is simple to use, but the manual must be referenced. There is no indication on the carrier itself showing where to place the handle when installed in the vehicle.
  • The CRS warning was illustrated but was buried within the text.

Convertible

Cybex Sirona S

4–65 lb · up to 49" · model 519004437

Rear-Facing ★★★★★ 4–50 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • To convert to this mode of use from other modes, the user must follow steps given in the manual; there are no illustrations on the car seat depicting the conversion.
  • The user may find the belt positioning feature/lock-off confusing to use; refer to the owner's manual for complete instructions.
  • The instruction manual storage location may be difficult to find. There is no overview of different methods of installation.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • To convert to this mode of use from other modes, the user must follow steps given in the manual; there are no illustrations on the car seat depicting the conversion.
  • The tether is not labeled in the diagrams showing overviews of the different methods of installation. There are no illustrations on the seat showing how to prepare LATCH for use.
  • The user may find the belt positioning feature/lock-off confusing to use; refer to the owner's manual for complete instructions.
  • The instruction manual storage location may be difficult to find, and it cannot be accessed while the child is secured in the seat. The warning that the rear seat is the safest place in a vehicle for children is located among other warnings.

Booster

Cybex Solution Z-Fix

40–110 lb · up to 60" · model 519003579

Booster ★★★★★ 40–110 lb, to 60" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The booster seat was not fully assembled when it was removed from the packaging.
  • The instruction manual storage location cannot be accessed when a child is secured in the booster seat.

All-in-One

Evenflo EveryFit

4–120 lb · up to 57" · model 39312376COM

Rear-Facing ★★★★★ 4–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled when it was removed from the packaging and was not set for the smallest possible occupant. To convert to this mode of use from other modes, the user must follow steps given in the manual; there are no illustrations on the car seat depicting the conversion. The LATCH belt must be rerouted to convert to this mode of use from other modes.
  • The seat belt/LATCH path is only labeled on one side.
  • Interference is possible between a seat component and the seat belt when routing for installation. There is a line printed on the seat that must be leveled to ground.
  • The instruction manual storage location may be difficult to find and use.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • To convert to this mode of use from other modes, the user must follow steps given in the manual; there are no illustrations on the car seat depicting the conversion. The LATCH belt must be rerouted to convert to this mode of use from other modes.
  • The tether is not labeled in the diagrams showing overviews of the different methods of installation. The seat belt/LATCH path is only labeled on one side.
  • The seat belt lockoff/guide is simple to use, but the user may need to refer to the owner's manual for complete instructions.
  • The instruction manual storage location may be difficult to find and use.
Booster ★★★★★ 40–120 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • To convert to this mode of use from other modes, the user must follow steps given in the manual; there are no illustrations on the car seat depicting the conversion. There are no illustrations on the label showing the user how to convert this car seat from highback to no back mode.
  • Diagrams showing highback and no back methods are not labeled on the car seat labels. The shoulder belt path labels are not in contrasting text and the lap belt path label is only contrasting on one side.
  • The instruction manual storage location may be difficult to find and use.

All-in-One

Graco 4Ever DLX

4–120 lb · up to 57" · model 2074644

Rear-Facing ★★★★★ 4–40 lb, to 57" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The user is required to install the cup holders prior to using the seat; therefore, the seat is not ready to use when removed from the packaging. When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • Interference is possible between a seat component and the seat belt when routing for installation. LATCH attachments have buttons to depress for removal. The storage location for the LATCH belt is not obvious and may be overlooked.
  • Lap-belt-only usage instructions are not given separately in the belt routing section.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • The belt positioning feature is simple to use, but the caregiver may need to consult the owner's manual for more information. LATCH attachments have buttons to depress for removal. The storage locations for the LATCH belt or tether hook are not obvious and may be overlooked.
  • The instruction manual storage location cannot be accessed while the child is secured in the seat. Lap-belt-only usage instructions are not given separately in the belt routing section.
Booster ★★★★★ 40–120 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • To convert this seat to booster mode from another mode of use, multiple actions are required, but they are simple. There are no illustrations on the seat depicting how to convert the seat from highback mode to no back mode.
  • The shoulder belt portion of the belt path is not labeled.
  • The shoulder belt may slip out of the belt guide after multiple uses.
  • The instruction manual storage location cannot be accessed while the child is secured in the seat.

Infant

Graco Snugride Snugfit 35

4–35 lb · up to 32" · model 2121497

Rear-Facing ★★★★★ 4–35 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage system for the LATCH attachments exists but may be overlooked. There is no label showing where to put the car seat's carry handle during travel in the vehicle.
  • The instruction manual storage location may be difficult to find.

All-in-One

Graco True3Fit LX

5–100 lb · up to 57" · model 2214637

Rear-facing ★★★★★ 5–40 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations on the car seat depicting the conversion. The LATCH belt must be rerouted to convert to this mode of use from other modes. Loose parts may be generated when disassembling for cleaning. The harness must be rethreaded to reassemble after cleaning the car seat.
  • Additional sizing information is missing.
  • The caregiver may need to move padding to route the seat belt or LATCH strap. The belt path does not accommodate a 95th percentile male hand. LATCH attachments have buttons to depress for removal. The storage system maybe easily overlooked as it is not clearly labeled.
  • The manual storage may be difficult to find. The section describing vehicle seat belt types is incomplete and may be missing important information. The user must read text to properly route the LATCH strap.
Forward-facing ★★★★★ 26.5–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations given on the car seat to show conversion to this mode from another mode of use. When converting to this mode of use, there are multiple steps to follow, but the actions themselves are simple. The flexible LATCH belt must be rerouted in order to convert the seat to this mode.
  • Additional sizing information is missing. The labels do not contain LATCH preparation illustrations. The labels may not explain the use of the LATCH. The labels do not remind the user to tighten the LATCH. The labels do not explain how to use or remove the tether strap.
  • The caregiver may need to move padding to route the seat belt or LATCH strap. The belt positioning feature/lock-off is simple to use, but the user must refer to the owner's manual for complete instructions. LATCH attachments have buttons to depress for removal.
  • The manual storage may be difficult to find and the manual cannot be accessed while the car seat is installed in this mode. The user must read text to properly route the LATCH strap and use the tether.
Booster ★★★★★ 40–100 lb, to 57" · Booster
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The act of converting the car seat to this mode of use is simple, but multiple actions are required. There are no illustrations given on the car seat to show conversion to this mode from another mode of use, and the flexible LATCH belt must be rerouted.
  • Additional sizing information is missing.
  • The shoulder belt positioning device requires the use of two hands, but the action of positioning is simple.
  • The manual storage may be difficult to find and the manual cannot be accessed while the car seat is installed in this mode.

Convertible

Joie Chili Spin 360

4–65 lb · up to 49" · model C2323AASHA900

Rear-facing ★★★★★ 4–40 lb, to 43" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • Loose parts are generated when the seat is disassembled for cleaning.
  • There is not a full picture of a child properly restrained in the child safety directly next to the sizing information on the label. There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain the use of LATCH in detail. The labels do not remind the user to tighten the LATCH belt.
  • LATCH attachments have buttons to depress for removal. The storage location for the LATCH belt is not obvious and may be overlooked.
  • No complete illustration of a child in the CRS is shown next to height/weight information.
Forward-facing ★★★★★ 30–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • To convert this seat to forward-facing mode from another mode of use, multiple actions are required, but they are simple. Loose parts are generated when the seat is disassembled for cleaning.
  • There is not a full picture of a child properly restrained in the child safety directly next to the sizing information on the label. The seat belt path is not completely labeled. There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain the use of LATCH in detail. The labels do not remind the user to tighten the LATCH belt. The labels do not explain how to use the tether strap.
  • The instruction manual storage location cannot be accessed while the child is seated in the seat.The instruction manual storage location may be difficult to find.

Convertible

Nuna revv

5–40 lb · up to 43" · model CS13600HAZ

Rear-Facing ★★★★★ 5–40 lb, to 43" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness clip itself is not labeled, but there is a label on the seat showing where to position it on the child.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Labels do not explain how to use LATCH.
  • There is nothing on the seat that provides immediate feedback to the user regarding ideal installation angle. LATCH attachments have buttons to depress for removal.
  • A complete illustration of a child in the car seat is not located next to height/weight sizing information. There is not a labeled overview of each final installation method.
Forward-Facing ★★★★★ 25–40 lb, to 43" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness clip itself is not labeled, but there is a label on the seat showing where to position it on the child.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Labels do not explain how to use LATCH.
  • LATCH attachments have buttons to depress for removal.
  • The instruction manual storage location cannot be accessed when the car seat is installed in this mode. A complete illustration of a child in the car seat is not located next to height/weight sizing information. There is not a labeled overview of each final installation method. The tether is mentioned in the text, but it is not labeled in the picture showing the finished installation.

Infant

UPPAbaby Mesa

4–35 lb · up to 32" · model 1017-MSA-US-HEN

Rear-Facing ★★★★★ 4–35 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling.
  • LATCH attachments have buttons to depress for removal.
  • The instruction manual storage location cannot be accessed while the child is secured in the seat. Instructions for determining seat belt types are present but are incomplete.

Infant

UPPAbaby Mesa V2

4–35 lb · up to 49" · model 1002-MSA-US-ALC

Rear-Facing ★★★★★ 4–35 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The CRS was not set for the youngest mode when removed from the packaging.
  • The illustration is small and in a sideview, making it unclear. While in this mode, the manual cannot be accessed.

Infant

Baby Jogger City Go 2

4–35 lb · up to 32" · model 2082708

Rear-Facing ★★★★★ 4–35 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The CRS is not set for the youngest mode when removed from the packaging. Upon arrival, the shoulder straps were in the 2nd to lowest setting. The harness clip was not labeled. Loose parts were generated when disassembled for cleaning.
  • The labels do not remind the user to tighten the latch. There are no illustrations for LATCH preparation. The labels do not explain how to use the LATCH. The LATCH illustrations are unclear.
  • The illustration on the label does not show the lock off arm needing to come up for the belt to go under it. The storage system for the lower anchors is easily overlooked due to it not being in contrasting colors with the seat. The LATCH attachments have buttons to depress for removal.
  • The supplemental child sizing information was found in the warnings section of the manual, but it should've been in the section that applies to the fit of the child. The supplemental sizing information was not separated or bolded. The seatbelt section is incomplete. The instructions and illustrations are missing for the lap belt only use for the base and baseless installation. The airbag warning was buried in text and not in its own separate section.

Convertible

Baby Jogger City Turn

4–65 lb · up to 49" · model 2159785

Rear-Facing ★★★★★ 4–50 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The CRS is not fully assembled when removed from the packaging. The seat was not set for the youngest mode when removed from the packaging. The cup holder is not attached; It must be attached for use. The recline foot was not in the proper position for rear-facing mode. The labeling on the harness clip is unclear about the placement being level with the armpits. The labeling does not show how to adjust the foot recline for different modes. The label illustrations do not show how to convert to Rear-Facing mode. The flexible LATCH must be rerouted for conversion to this mode. The act of converting to this mode has many complicated steps; the user must read the manual. Loose parts are generated when disassembling for cleaning.
  • The belt path is not clearly labeled. The user must turn the seat to expose the belt path. The instructions are unclear and do not show how to remove the lower attachments from the storage.
  • The CRS must be rotated to access the belt path. The lower anchor labels are molded into the seat and isn't in a contrasting color.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The CRS is not fully assembled when removed from the packagaing. The seat was not set for the youngest mode when removed from the packaging. The act of converting the car seat to this mode of use is simple, but multiple actions are required.
  • The LATCH illustrations are unclear.
  • The padding must be lifted to access the rapid lock. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. The belt positioning feature is simple to use, but the caregiver may need to consult the owner's manual for more information. The CRS labels do not have instructions nor illustrations for the belt positioning feature. The storage for the tethers is not labeled. The lower anchor labels are molded into the seat and isn't a contrasting color.
  • The supplemental sizing information is only found in text. The instruction manual storage location may be difficult to find or cannot be accessed when the car seat is installed.

All-in-One

Baby Trend Cover Me

4–100 lb · up to 57" · model CV89D07B

Rear-Facing ★★★★★ 4–40 lb, to 57" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not set for the smallest possible occupant when the car seat was removed from its packaging. A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning, and loose parts are generated in this process. There are no illustrations on the label showing how to convert the car seat to rear-facing mode from other modes of use. The flexible LATCH belt must be rerouted in order to convert the seat to rear-facing mode. When converting to rear-facing mode from booster mode, the harness must be reinstalled.
  • Supplemental sizing information is missing from the labels.
  • The caregiver may need to move padding to route the seat belt or LATCH strap. Interference is possible between a seat component and the seat belt when routing for installation. There is an angle feedback "bubble" for children 4-22lb, but for those over 22lb, there is only a level-to-ground line. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle.
  • The instruction manual storage location may be difficult to find and use. The manual doesn't show how to remove LATCH attachments from storage.
Forward-Facing ★★★★★ 23–65 lb, to 50" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness must be rethreaded to reassemble after cleaning the car seat cover/padding. There are no illustrations on the label showing how to convert the car seat to forward-facing mode from other modes of use. The flexible LATCH belt must be rerouted in order to convert the seat to forward-facing mode. When converting to forward-facing mode from booster mode, the harness must be reinstalled. Loose parts are generated when removing the pad/cover for cleaning.
  • The caregiver may need to move padding to route the seat belt or LATCH strap. Interference is possible between a seat component and the seat belt when routing for installation. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle.
  • The instruction manual storage location may be difficult to find and use. The manual doesn't show how to remove LATCH attachments from storage.
Booster ★★★★★ 40–100 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations on the label showing how to convert the car seat to booster mode from other modes of use. When converting this seat to booster mode, the harness must be removed and could be misplaced.
  • Supplemental sizing information is missing from the labels. A full image of a child in the seat is not located directly next to sizing information. In the diagram showing methods of installation for this mode of use, the car seat is not depicted in a vehicle seat. The shoulder belt portion of the belt path is not labeled.
  • The shoulder belt guide may allow unintentional slack to occur in the seat belt.
  • The instruction manual storage location may be difficult to find and use.

Combination

Baby Trend Hybrid 3-in-1

22–100 lb · up to 57" · model FB58183

Forward-Facing ★★★★★ 22–50 lb, to 48" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled and ready to use for the smallest possible occupant when it was removed from its packaging. A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning. There are no illustrations on the label showing how to convert the car seat to forward-facing mode from other modes of use. When converting to forward-facing mode from booster mode, the harness must be reinstalled.
  • Supplemental sizing information is missing from the labels. In the diagram showing methods of installation for this mode of use, the car seat is not depicted in a vehicle seat and the tether is not labeled (in text). The labels do not show how to remove LATCH attachments from storage.
  • Interference is possible between a seat component and the seat belt when routing for installation. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage locations for the LATCH belt and/or tether strap are not obvious and may be overlooked.
  • The instruction manual storage location may be difficult to find and use, and it cannot be accessed while a child is restrained in the seat. The warning that the rear seat is the safest place in a vehicle for children is located amongst other warnings. Seat belt and LATCH belt routing paths are not clear from illustrations alone; the user must read text.
Booster ★★★★★ 40–100 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations on the label showing how to convert the car seat to booster mode from other modes of use. When converting this seat to booster mode, the harness must be removed and could be misplaced.
  • The shoulder belt guide may allow unintentional slack to occur in the seat belt.
  • The instruction manual storage location may be difficult to find and use, and it cannot be accessed while a child is restrained in the seat. The warning that the rear seat is the safest place in a vehicle for children is located amongst other warnings.

Convertible

Britax Advocate Clicktight

5–65 lb · up to 49" · model E1A268J

Rear-Facing ★★★★★ 5–40 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant when removed from the packaging. There are no illustrations given on the car seat to show conversion to this mode from another mode of use. When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. There are no illustrations on the seat showing how to prepare LATCH for use, and the step to slide the LATCH strap to full length toward the left side is not included.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked. The seat belt lockoff is simple to use, but the user may need to refer to the owner's manual for complete instructions.
  • Instructions for determining seat belt types are present but are incomplete.
Forward-Facing ★★★★★ 20–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations given on the car seat to show conversion to this mode from another mode of use. When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. The tether is not labeled in the diagrams showing overviews of the different methods of installation. There are no illustrations on the seat showing how to prepare LATCH for use. The step to slide the LATCH strap to full length toward the left side is not included.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage locations for the LATCH belt and/or tether strap are not obvious and may be overlooked. The seat belt lockoff is simple to use, but the user may need to refer to the owner's manual for complete instructions.
  • Supplemental sizing information is given in text only (not illustrated) in the manual. Instructions for determining seat belt types are present but are incomplete. The tether is not labeled in the illustrations depicting acceptable modes of installation.

Convertible

Britax Advocate Clicktight ARB

5–65 lb · up to 49" · model E1A499S

Rear-Facing ★★★★★ 5–40 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant when removed from the packaging. The anti-rebound bar should be installed prior to use (was not fully assembled). There are no illustrations given on the car seat to show conversion to this mode from another mode of use. When converting to this mode of use, the LATCH belt must be rerouted through the belt path and the anti-rebound bar must be installed.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. The anti-rebound bar is not shown in the overview of methods of installation for this mode. There are no illustrations on the seat showing how to prepare LATCH for use, and the step to slide the LATCH strap to full length toward the left side is not included.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked. The seat belt lockoff is simple to use, but the user may need to refer to the owner's manual for complete instructions.
  • The instruction manual was not attached to the car seat when the car seat was taken out of the package. Instructions for determining seat belt types are present but are incomplete.
Forward-Facing ★★★★★ 20–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations given on the car seat to show conversion to this mode from another mode of use. When converting to this mode of use, the LATCH belt must be rerouted through the belt path and the anti-rebound bar must be removed.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. The tether is not labeled in the diagrams showing overviews of the different methods of installation. There are no illustrations on the seat showing how to prepare LATCH for use. The step to slide the LATCH strap to full length toward the left side is not included.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage locations for the LATCH belt and/or tether strap are not obvious and may be overlooked. The seat belt lockoff is simple to use, but the user may need to refer to the owner's manual for complete instructions.
  • Supplemental sizing information is given in text only (not illustrated) in the manual. Instructions for determining seat belt types are present but are incomplete. The tether is not labeled in the illustrations depicting acceptable modes of installation.

Convertible

Britax Boulevard Clicktight

5–65 lb · up to 49" · model E1A499S

Rear-Facing ★★★★★ 5–40 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations given on the car seat to show conversion to this mode from another mode of use. When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. There are no illustrations on the seat showing how to prepare LATCH for use, and the step to slide the LATCH strap to full length toward the left side is not included.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked. The seat belt lockoff is simple to use, but the user may need to refer to the owner's manual for complete instructions.
  • Instructions for determining seat belt types are present but are incomplete.

Convertible

Britax Boulevard Clicktight

20–65 lb · up to 49" · model E1A329S

Forward-Facing ★★★★★ 20–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations given on the car seat to show conversion to this mode from another mode of use. When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. The tether is not labeled in the diagrams showing overviews of the different methods of installation. There are no illustrations on the seat showing how to prepare LATCH for use. The step to slide the LATCH strap to full length toward the left side is not included.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage locations for the LATCH belt and/or tether strap are not obvious and may be overlooked. The seat belt lockoff is simple to use, but the user may need to refer to the owner's manual for complete instructions.
  • Supplemental sizing information is given in text only (not illustrated) in the manual. Instructions for determining seat belt types are present but are incomplete. The tether is not labeled in the illustrations depicting acceptable modes of installation.

Convertible

Britax Boulevard Clicktight ARB

5–65 lb · up to 49" · model E1A478F

Rear-Facing ★★★★★ 5–40 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The anti-rebound bar should be installed prior to use (was not fully assembled). There are no illustrations given on the car seat to show conversion to this mode from another mode of use. When converting to this mode of use, the LATCH belt must be rerouted through the belt path and the anti-rebound bar should be installed.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. The anti-rebound bar is not shown in the overview of methods of installation for this mode. There are no illustrations on the seat showing how to prepare LATCH for use, and the step to slide the LATCH strap to full length toward the left side is not included.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked. The seat belt lockoff is simple to use, but the user may need to refer to the owner's manual for complete instructions.
  • Instructions for determining seat belt types are present but are incomplete.
Forward-Facing ★★★★★ 20–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations given on the car seat to show conversion to this mode from another mode of use. When converting to this mode of use, the LATCH belt must be rerouted through the belt path and the anti-rebound bar must be removed.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. The tether is not labeled in the diagrams showing overviews of the different methods of installation. There are no illustrations on the seat showing how to prepare LATCH for use. The step to slide the LATCH strap to full length toward the left side is not included.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage locations for the LATCH belt and/or tether strap are not obvious and may be overlooked. The seat belt lockoff is simple to use, but the user may need to refer to the owner's manual for complete instructions.
  • Supplemental sizing information is given in text only (not illustrated) in the manual. Instructions for determining seat belt types are present but are incomplete. The tether is not labeled in the illustrations depicting acceptable modes of installation.

Combination

Britax Grow With You Clicktight Plus

25–120 lb · up to 63" · model E1C207U

Forward-Facing ★★★★★ 25–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations given on the car seat to show conversion to this mode from another mode of use. Loose parts may be generated when disassembling for cleaning.
  • The tether is not labeled in the diagrams showing overviews of the different methods of installation.
  • The belt positioning feature/lock-off is simple to use, but the user must refer to the owner's manual for complete instructions. LATCH attachments have buttons to depress for removal.
  • No complete illustration of a child in the car seat is shown next to height/weight information. The tether is not labeled in the illustrations depicting acceptable modes of installation. Instructions for determining seat belt types are present but are incomplete.
Booster ★★★★★ 40–120 lb, to 63" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations given on the car seat to show conversion to this mode from another mode of use. Loose parts may be generated when disassembling for cleaning.
  • The warning against using a lap-only belt does not explicitly state that a lap-only belt may not be used.
  • No complete illustration of a child in the car seat is shown next to height/weight information. The warning against using a lap-only belt is not illustrated in the seat belt routing/usage section, and the car seat is not depicted in a vehicle seat.

Booster

Britax Highpoint

40–120 lb · up to 63" · model E1C238T

Booster ★★★★★ 40–120 lb, to 63" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled and ready to use for the smallest possible occupant when it was removed from its packaging.
  • Diagrams showing methods of use (highback and no back) are not labeled on the car seat's labels. The warning against using a lap-only belt does not explicitly state that a lap-only belt may not be used.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the child is secured in the seat. The warning that the rear seat is the safest place in a vehicle for children is located amongst other warnings and is not illustrated. The warning against using a lap-only belt is not illustrated in the seat belt routing/usage section and does not explicitly state that a lap-only belt may not be used.

Convertible

Britax Marathon Clicktight

5–65 lb · up to 49" · model E1A385R

Rear-Facing ★★★★★ 5–40 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant when removed from the packaging. There are no illustrations given on the car seat to show conversion to this mode from another mode of use. When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. There are no illustrations on the seat showing how to prepare LATCH for use, and the step to slide the LATCH strap to full length toward the left side is not included.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked. The seat belt lockoff is simple to use, but the user may need to refer to the owner's manual for complete instructions.
  • Instructions for determining seat belt types are present but are incomplete.
Forward-Facing ★★★★★ 20–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations given on the car seat to show conversion to this mode from another mode of use. When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. The tether is not labeled in the diagrams showing overviews of the different methods of installation. There are no illustrations on the seat showing how to prepare LATCH for use. The step to slide the LATCH strap to full length toward the left side is not included.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage locations for the LATCH belt and/or tether strap are not obvious and may be overlooked. The seat belt lockoff is simple to use, but the user may need to refer to the owner's manual for complete instructions.
  • Supplemental sizing information is given in text only (not illustrated) in the manual. Instructions for determining seat belt types are present but are incomplete. The tether is not labeled in the illustrations depicting acceptable modes of installation.

Convertible

Britax Marathon Clicktight ARB

5–65 lb · up to 49" · model E1A598C

Rear-Facing ★★★★★ 5–40 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The anti-rebound bar should be installed prior to use (was not fully assembled). There are no illustrations given on the car seat to show conversion to this mode from another mode of use. When converting to this mode of use, the LATCH belt must be rerouted through the belt path and the anti-rebound bar must be installed.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. The anti-rebound bar is not shown in the overview of methods of installation for this mode. There are no illustrations on the seat showing how to prepare LATCH for use, and the step to slide the LATCH strap to full length toward the left side is not included.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked. The seat belt lockoff is simple to use, but the user may need to refer to the owner's manual for complete instructions.
  • Instructions for determining seat belt types are present but are incomplete.
Forward-Facing ★★★★★ 20–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations given on the car seat to show conversion to this mode from another mode of use. When converting to this mode of use, the LATCH belt must be rerouted through the belt path and the anti-rebound bar must be removed.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. The tether is not labeled in the diagrams showing overviews of the different methods of installation. There are no illustrations on the seat showing how to prepare LATCH for use, and the step to slide the LATCH belt to full length toward the left side is not included.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage locations for the LATCH belt and/or tether strap are not obvious and may be overlooked. The seat belt lockoff is simple to use, but the user may need to refer to the owner's manual for complete instructions.
  • Supplemental sizing information is given in text only (not illustrated) in the manual. Instructions for determining seat belt types are present but are incomplete. The tether is not labeled in the illustrations depicting acceptable modes of installation.

All-in-One

Britax One4Life Slim

5–120 lb · up to 63" · model E1D407F

Rear-facing ★★★★★ 5–50 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set up for the smallest occupant when it was removed from the packaging. To convert to this mode of use from other modes, the user must follow steps given in the manual; there are no illustrations on the car seat depicting the conversion. The LATCH belt must be rerouted to convert to this mode of use from other modes. Loose parts may be generated when disassembling for cleaning.
  • The labels were already peeling when the restraint was removed from its packaging.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The instruction manual storage location may be difficult to find and use. The instruction manual storage location cannot be accessed while the child is seated in the seat. The warning that the safest place for children is the rear seat is buried within text.
Forward-Facing ★★★★★ 30–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • To convert to this mode of use from other modes, the user must follow steps given in the manual; there are no illustrations on the car seat depicting the conversion. The LATCH belt must be rerouted to convert to this mode of use from other modes. Loose parts may be generated when disassembling for cleaning.
  • There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain the use of LATCH in detail.
  • The caregiver may need to move padding to route the seat belt or LATCH strap. The belt path does not accommodate a 95th percentile male hand. The lower anchor attachments require twisting to remove from the vehicle. The storage system maybe easily overlooked as it is not clearly labeled.
  • The instruction manual storage location may be difficult to find and use, and it cannot be accessed while the child is seated in the seat. The warning that the safest place for children is the rear seat is buried within text.
Booster ★★★★★ 40–120 lb, to 63" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • To convert to this mode of use from other modes, the user must follow steps given in the manual; there are no illustrations on the car seat depicting the conversion. Loose parts may be generated when disassembling for cleaning.
  • The manual storage may be difficult to find. There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. There is no illustration of a child in the CRS. The section describing vehicle seat belt types is incomplete and may be missing important information.
  • The shoulder belt positioning device requires the use of two hands, but the action of positioning is simple.
  • The instruction manual storage location may be difficult to find and use, and it cannot be accessed while the child is seated in the seat. The warning that the safest place for children is the rear seat is buried within text. The illustration does not display the CRS in a vehicle seat.

Convertible

Britax Poplar

5–65 lb · up to 49" · model E1C933QDI

Rear-Facing ★★★★★ 5–50 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The CRS is not set for the youngest mode when removed from the packaging. The act of converting the car seat to this mode of use is simple, but multiple actions are required. Loose parts may be generated when disassembling for cleaning.
  • There is no illustration directly next to the sizing info. There is no illustration of a child in the CRS.
  • The user may need to move padding to route the seat belt or LATCH strap. The lower attachments require twisting to remove from the vehicle. The storage system for the lower anchors are not clearly labeled.
  • The instruction manual storage location may be difficult to find or cannot be accessed when the car seat is installed. There is no illustration directly next to the sizing info. There is no illustration of a child in the CRS. The airbag warning is buried in bulleted text and is not illustrated.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The act of converting the car seat to this mode of use is simple, but multiple actions are required. Loose parts may be generated when disassembling for cleaning.
  • There is no illustration directly next to the sizing info. There is no illustration of a child in the CRS.
  • The user may need to move padding to route the seat belt or LATCH strap. The lower attachments require twisting to remove from the vehicle. The belt lockoff may be difficult or confusing to use. The storage system for the lower anchors are not clearly labeled.
  • The instruction manual storage location may be difficult to find or cannot be accessed when the car seat is installed. There is no illustration directly next to the sizing info. There is no illustration of a child in the CRS. The airbag warning is buried in bulleted text and is not illustrated. Allowable height/weight measurements in the manual do not match the information on the labels.

Booster

Britax Skyline

40–120 lb · up to 63" · model E1C269H

Booster ★★★★★ 40–120 lb, to 63" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant (back not attached) when removed from the packaging.
  • Illustrations of highback and low back modes are not labeled on the car seat's labels. The warning against using a lap-only belt does not explicitly state that a lap-only belt may not be used.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the child is secured in the seat. Supplemental sizing information is given in text only (not illustrated) in the manual. The warning against using a lap-only belt is not illustrated in the seat belt routing/usage section.

infant

Britax Willow S

4–30 lb · up to 32" · model E1C993XDI

Rear-facing ★★★★★ 4–30 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat is not set for the smallest occupant when it was removed from packaging. Harness slots may be misaligned or small, which could cause confusion when adjusting the harness height. The harness must be rethreaded to adjust height for the child's growth. The harness must be taken out and rethreaded when cleaning the restraint.
  • The labels were already peeling when the restraint was removed from its packaging.
  • A printed/molded line is present on the restraint that must be leveled to the ground.
  • The owner's manual was not attached to the seat when it was removed from its packaging. The manual cannot be accessed while the car seat is installed in this mode. The instruction manual storage location may be difficult to find. The user may find the manual storage difficult to use. The section describing vehicle seat belt types is incomplete and may be missing important information.

Booster

BubbleBum Bubblebum Booster

40–100 lb · up to 57" · model BB0012US

Booster ★★★★★ 40–100 lb, to 57" · No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • Supplemental sizing information is given in text only on the labeling (not illustrated). The belt routing path is not completely labeled. The warning against using a lap-only belt is not illustrated and does not explicitly state that a lap-only belt may not be used.
  • The shoulder belt guide requires two hands to use, but the action is simple.
  • The instruction manual storage location cannot be accessed when the car seat is installed and a child is seated.

All-in-One

Century Drive on 3-in-1

5–100 lb · up to 57" · model 2144807

Rear-Facing ★★★★★ 5–40 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The CRS is not set for the youngest mode when removed from packaging. The flexible LATCH belt must be rerouted to convert to this mode.
  • Additional sizing info is missing. There is no height information listed on the labels. There are no illustrations for LATCH preparation and labels do not explain the use of LATCH. The labels do not remind user to tighten the LATCH.
  • The belt path does not accommodate a 95th percentile male hand. There is possible interference with the crotch strap and vehicle belt. The lower anchor attachments require twisting to remove from the vehicle. The storage system maybe easily overlooked as it is not clearly labeled.
  • The manual cannot be accessed in this mode and the storage system may be difficult to find as the label color is not contrasting. Height information only list "one inch below", but the height limit is listed on page 17 of the manual. The safest placement warning is not illustrated. There is no height limit listed for the Rear-Facing mode on the labels. Therefore, the labels and instructions do not match.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The flexible LATCH belt must be rerouted to convert to this mode.
  • The supplemental sizing information does not indicate the child's ear level. There are no illustrations for LATCH preparation. The LATCH illustrations are unclear. The labels do not remind user to tighten the LATCH. The label does not show how to remove the tether.
  • The lower anchors require twisting to remove from the vehicle. The storage system for the lower anchors are not clearly labeled.
  • The manual may be difficult to find and cannot be accessed in this mode.
Booster ★★★★★ 40–100 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The flexible LATCH belt must be rerouted to convert to this mode.
  • The supplemental sizing information does not mention the child's head placement.
  • In the youngest mode, it requires two hands to thread the belt positioning guide.
  • The instruction manual storage location may be difficult to find and cannot be accessed when a child is secured in the booster seat.

Infant

Chicco Fit2 Adapt

4–35 lb · up to 35" · model 7079771750070

Rear-Facing ★★★★★ 4–35 lb, to 35" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness clip is not labeled. When disassembling for cleaning, the harness must be rethreaded and important parts may become loose and could be misplaced. The instruction manual directs the user to the manufacturer's website for directions on how to take the padding off.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. There is no harness slot height indication on the label. Must read text in order to route vehicle seatbelt properly. The label does not provide illustrations and instructions on the use of the lower anchors. The label does not remind the users to tighten the LATCH.
  • The belt positioning feature/lock-off is simple to use, but the user must refer to the owner's manual for complete instructions because there are no text instructions on the base. The LATCH attachments have buttons to depress for removal. The lower anchors storage system is not clearly labeled. There is no labeling to indicate which position the carrier handle should be placed while in the vehicle.
  • The storage system for the manual is not labeled. The instructions do not explain how to lock the seat belt. The illustration does not clearly show the proper direction of the Lower Attachments.

All-in-One

Chicco Fit4

4–100 lb · up to 57" · model 5079645490070

Rear-Facing ★★★★★ 4–40 lb, to 43" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant when removed from the packaging. The act of converting the car seat to this mode of use is simple, but multiple actions are required.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. The labels do not explain how to use LATCH in detail.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. LATCH attachments have buttons to depress for removal. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The instruction manual storage location may be difficult to find. Supplemental sizing information is missing from the instruction manual. Instructions for determining seat belt types are present but are incomplete.
Forward-Facing ★★★★★ 25–65 lb, to 54" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The act of converting the car seat to this mode of use is simple, but multiple actions are required.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. The tether is not labeled in the diagrams showing overviews of the different methods of installation. The labels do not explain how to use LATCH in detail. Labels do not show how to remove the tether strap from storage.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. LATCH attachments have buttons to depress for removal. The storage location(s) for the LATCH belt and/or tether strap is not obvious and may be overlooked.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the child is secured in the seat. Supplemental sizing information is given in text only (not illustrated) in the manual. The warning indicating that the safest place in a vehicle for children is the rear seat is not illustrated. Instructions for determining seat belt types are present but are incomplete.
Booster ★★★★★ 40–100 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The act of converting the car seat to this mode of use is simple, but multiple actions are required.
  • Supplemental sizing information is missing from the labels. In the diagram showing methods of installation for this mode of use, the car seat is not depicted in a vehicle seat. The warning against using a lap-only belt is given in text only (not illustrated). The warning against using a lap-only belt does not explicitly state that a lap-only belt may not be used.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the child is secured in the seat. Supplemental sizing information is given in text only (not illustrated) in the manual. The warning indicating that the safest place in a vehicle for children is the rear seat is not illustrated. A warning against using a lap-only belt is not provided in the seat belt routing/usage section.

Booster

Chicco Kidfit

40–110 lb · up to 57" · model 79014520070

Booster ★★★★★ 40–110 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled and ready to use for the smallest possible occupant when it was removed from its packaging. There are no illustrations given on the car seat to show conversion to no-back mode from highback mode.
  • Supplemental sizing information is given in text only on the labels. The warning against using a lap-only belt is not illustrated.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the child is secured in the seat. The warning that the rear seat is the safest place in a vehicle for children is not illustrated.

Convertible

Chicco NextFit Max Zip Air

4–65 lb · up to 49" · model 5079671460070

Rear-Facing ★★★★★ 4–50 lb, to 43" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not set for the smallest possible occupant when it was removed from the packaging. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the car seat label showing how to convert to this mode of use from another mode.
  • Supplemental sizing information is missing from the labels. Labels do not show how to prepare LATCH attachments for use.
  • If the user is installing the car seat with a seat belt, the padding must be unzipped to route the belt properly. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. LATCH attachments have buttons to depress for removal.
  • The instruction manual storage location may be difficult to find. Supplemental sizing information is missing from the manual.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the car seat label showing how to convert to this mode of use from another mode.
  • Supplemental sizing information is missing from the labels. The tether is not labeled in text on the diagrams showing acceptable methods of installation. Labels do not show how to prepare LATCH attachments or tether strap for use.
  • If the user is installing the car seat with a seat belt, the padding must be unzipped to route the belt properly. LATCH attachments have buttons to depress for removal.
  • The instruction manual storage location may be difficult to find and cannot be accessed when the car seat is installed. Supplemental sizing information is given in text only (no illustration) in the manual. The tether is not labeled in the diagrams showing acceptable methods of installation.

Booster

Clek Olli

40–120 lb · up to 57" · model S91000320093

Booster ★★★★★ 40–120 lb, to 57" · No Back
Instructionsn/a
Labels★★★★★
Installing in the carn/a
Securing the child★★★★★
  • When disassembling for cleaning, important parts may become loose and could be misplaced.
  • Seat belt path labeling is not in a contrasting color.
  • The instruction manual storage location may be difficult to find and cannot be accessed when a child is secured in the booster seat. The warning against using a lap-only belt is not illustrated in the belt routing section of the manual.

All-in-One

Cosco Easy Elite

5–80 lb · up to 52" · model CC285-GHF

Rear-Facing ★★★★★ 5–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not set for the smallest occupant when it was removed from packaging. A headhugger or body pillow blocks harness slots from being visible. Harness slots are misaligned or small. To use the lowest harness height, the user must rethread the harness. The harness must be rethreaded after cleaning the padding. To convert the seat to this mode of use, the user may need to refer to the manual as there are multiple complicated steps. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the label to guide the user through conversion.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. There is no indication of proper harness height on the labeling. Labels do not explain how to use LATCH.
  • It may be uncomfortable for those with larger hands to route the LATCH belt or seat belt through the belt path. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. There is a line printed on the seat that must be leveled to ground. There are fewer than 3 levels of recline available. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. A storage system for the LATCH attachments exists, but it may be overlooked.
  • The instruction manual storage location may be difficult to find.
Forward-Facing ★★★★★ 22–50 lb, to 43" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness must be rethreaded after cleaning the padding. To convert the seat to this mode of use, the user may need to refer to the manual as there are multiple complicated steps. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the label to guide the user through conversion.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. There is no indication of proper harness height on the labeling. Labels do not explain how to use LATCH. Labels do not show how to remove the tether strap from storage and prepare it for use.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. Storage systems for the LATCH attachments and/or tether strap exist, but they may be overlooked.
  • The instruction manual storage location may be difficult to find.
Booster ★★★★★ 40–80 lb, to 52" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • To convert the seat to this mode of use, the user may need to refer to the manual as there are multiple complicated steps. There are no illustrations on the label to guide the user through conversion.
  • Supplemental sizing information is missing from the labels. The seat belt routing path is not completely labeled.
  • The shoulder belt guide may allow unintentional slack to develop in the seat belt.
  • The instruction manual storage location may be difficult to find. The warning against using a lap-only belt is not provided in the belt routing section of the manual.

Combination

Cosco Finale DX 2-in-1

30–100 lb · up to 52" · model BC121EJG

Forward-Facing ★★★★★ 30–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness must be rethreaded to adjust for the child's growth and cleaning. There are multiple simple steps required to convert the seat to this mode of use. Loose parts may be generated during cleaning. The harness clip must be removed for cleaning.
  • There is no illustration of a child in the CRS. The forward-facing harness labels and booster labels are not in contrasting colors. There is no indication of proper harness slot height on the labeling. There are no illustrations for LATCH preparation. The labels do not explain latch use. The labels do not remind user to tighten the LATCH.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage system for the LATCH attachments exists, but is not clearly labeled and may be overlooked.
  • The manual storage is cannot be accessed in this mode and may be difficult to find. There is no illustration of a child pictured in the CRS. The supplemental sizing information is provided only in text. The warning that the rear seat is the safest place in a vehicle for children is buried within the text. The warning was found on page 53 and is not on it's own page.
Booster ★★★★★ 40–100 lb, to 52" · Highback
Instructionsn/a
Labels★★★★★
Installing in the carn/a
Securing the child★★★★★
  • When converting to this mode of use, there are multiple steps to follow, but the actions themselves are simple. Loose parts may be generated when disassembling for cleaning. The harness clip must be removed for cleaning.
  • The supplemental sizing information does not indicate the child's head placement. The illustration does not display the CRS in a vehicle seat. The belt path is not labeled and is not in contrasting colors.
  • There is a specific note about not using the shoulder guide in this mode.
  • The manual storage may be difficult to find. The labels do not describe the steps to address a poor fit. The warning that the rear seat is the safest place in a vehicle for children is buried within bulleted text. The CRS illustration is not displayed in a vehicle seat. The user must read the text to route lap and shoulder belt.

Infant

Cybex Cloud Q

4–35 lb · up to 30" · model 519003939

Rear-Facing ★★★★★ 4–35 lb, to 30" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not set for the smallest possible occupant when it was removed from its packaging.
  • Supplemental sizing information is given in text only (not illustrated) on the labels. There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. No indication of correct harness height relative to the child is given on the labels. The belt routing path is not clearly labeled.
  • LATCH attachments have buttons to depress for removal. There is no labeling to indicate which position the carrier handle should be placed in in the vehicle.
  • The instruction manual was attached to the seat in a difficult-to-find location when the car seat was removed from its packaging. The instruction manual storage location cannot be accessed when the car seat is installed. Instructions for determining seat belt types are present but are incomplete.

Booster

Cybex Solution B-Fix

40–120 lb · up to 60" · model 521001641

Booster ★★★★★ 40–120 lb, to 60" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The booster seat was not fully assembled when it was removed from the packaging. When disassembling for cleaning, mandatory parts may become loose and could be misplaced.
  • Supplemental sizing information is given in text only (not illustrated).
  • The instruction manual storage location may be difficult to find and cannot be accessed when a child is secured in the booster seat.

Booster

Diono Cambria 2

40–120 lb · up to 63" · model 31210-NA-01

Booster ★★★★★ 40–120 lb, to 63" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled when removed from the packaging. The conversion from high back to low back is difficult and may not be illustrated on the label.
  • The label does not illustrate the warning against using the lap belt only; the warning is provided in text only. Routing requires reading the text, and no illustration is provided.
  • The shoulder belt may be able to slip out of the belt positioning guide.
  • The instruction manual storage location may be difficult to find or inaccessible when the car seat is installed. The indication of the safest place in a vehicle for children may be buried in text within other warnings. The warning against using the lap belt only is not illustrated.

Booster

Diono Monterey 2XT LATCH

40–120 lb · up to 63" · model 15614-na-01

Booster ★★★★★ 40–120 lb, to 63" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat is not fully assembled out of the box. There are no illustrations on the label to assist in the conversion of the seat from highback to backless booster mode.
  • The additional sizing info is in text only. The lap belt only warning label is text only.
  • The instruction manual storage location may be difficult to find and cannot be accessed when a child is secured in the booster seat. All methods of seat belt installation are not labeled. Airbag warning and safest placement warnings are found in separate sections. The CRS is not illustrated on a vehicle seat.

Booster

Diono Monterey 5iST FixSafe

54–120 lb · up to 63" · model 15704-NA-01

Booster ★★★★★ 54–120 lb, to 63" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. The seat belt path is not completely labeled. The warning against using a lap-only belt is not illustrated and does not explicitly state that a lap-only belt may not be used.
  • The shoulder belt guide requires two hands to use, but the action is simple.
  • The instruction manual storage compartment may be difficult to open. The instruction manual storage area cannot be accessed while the seat is installed and a child is in the seat. No complete illustration of a child in the car seat is shown next to height/weight information.

Booster

Diono Solana

40–120 lb · up to 63" · model 32051-NA-01

Booster ★★★★★ 40–120 lb, to 63" · No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The label does not illustrate a warning against using the lap belt only; the warning is provided in text only.
  • The shoulder belt guide requires two hands to use, but the action is simple. The shoulder belt could accidentally slip out of the belt positioning guide.
  • The instruction manual storage location may be difficult to find and is inaccessible when the car seat is installed. The indication of the safest place in a vehicle for children is buried in text within other warnings. The warning against using the lap belt only is not illustrated. The user must read text to route the belt.

All-in-One

Evenflo All4One

4–120 lb · up to 57" · model 39312442COM

Rear-Facing ★★★★★ 4–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled when it was removed from its packaging; the cup holders must be installed prior to use. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the car seat label showing how to convert to this mode of use from other modes.
  • The belt path is only labeled on one side. Labels do not explain how to use LATCH.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. The belt lockoff is simple to use, but the user may need to refer to the instruction manual for full guidance. The storage system for the LATCH attachments exists but may be overlooked.
  • The instruction manual was not attached to the car seat when it was removed from its packaging. The instruction manual storage location may be difficult to use and cannot be accessed when the car seat is installed.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the car seat label showing how to convert to this mode of use from other modes.
  • The tether is not labeled in the diagrams showing overviews of the different methods of installation. The belt path is only labeled on one side. Labels do not explain how to use LATCH or the tether strap.
  • The belt lockoff is simple to use, but the user may need to refer to the instruction manual for full guidance. The storage systems for the LATCH attachments and/or tether strap exist but may be overlooked.
  • The instruction manual storage location may be difficult to use and cannot be accessed when the car seat is installed. The tether is not labeled in the illustrations depicting acceptable methods of installation.
Booster ★★★★★ 40–120 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations on the car seat label showing how to convert to this mode of use from other modes. There are multiple steps required to convert the seat to this mode of use, and the user may need to refer to the instruction manual. There are no instructions on the labeling to convert the seat from highback to no back mode, though there are instructions to convert from no back to highback.
  • The lap belt path is only labeled in contrasting writing on one side. The shoulder belt guide labeling is not contrasting on either side and may be overlooked.
  • The shoulder belt guide requires two hands to use, but the action is simple. The shoulder belt guide may allow unintentional slack to occur in the seat belt.
  • The instruction manual storage location may be difficult to use and cannot be accessed when the car seat is installed.

All-in-One

Evenflo EveryKid

4–120 lb · up to 57" · model 39312339

Rear-Facing ★★★★★ 4–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled for the smallest occupant when it was removed from its packaging. When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • Supplemental sizing information is given in text only (not illustrated). The belt routing path is only labeled on one side.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. There is a line printed on the seat that must be leveled to ground.
  • The instruction manual was not attached to the car seat when it was removed from its packaging. The instruction manual storage location may be difficult to find. There is no overview of acceptable installation methods for this mode of use.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the label to guide the user through conversion.
  • Supplemental sizing information is given in text only (not illustrated). The tether is not labeled in the diagrams showing overviews of the different methods of installation. The belt routing path is only labeled on one side. Labels do not show how to remove the tether strap from storage and prepare it for use.
  • The instruction manual storage location may be difficult to find. There is no overview of acceptable installation methods for all types of LATCH connectors. The tether is not labeled in the diagrams showing acceptable methods of installation.
Booster ★★★★★ 40–120 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt may need to be rerouted through the belt path. There are no illustrations on the label to guide the user through conversion to this mode of use from another mode, nor are there illustrations showing how to convert the booster from highback mode to no back mode.
  • Supplemental sizing information is given in text only (not illustrated). The seat belt path is not completely and clearly labeled with contrasting text.
  • It is simple to position the shoulder belt using the belt guide, but it may require two hands.
  • The instruction manual storage location may be difficult to find.

Booster

Evenflo Go Time

40–120 lb · up to 57" · model 35012434

Booster ★★★★★ 40–120 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled and ready to use when it was removed from its packaging. There are no labels on the car seat to show how to convert the seat from highback mode to no back mode.
  • The lap belt path is only labeled in contrasting lettering on one side. Both shoulder belt routing paths are labeled in text the same color as the plastic shell which makes the labels difficult to see.
  • The shoulder belt guide requires two hands to use, but the action is simple.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the car seat is installed and a child is seated in this mode.

Infant

Evenflo LiteMax 35

4–35 lb · up to 32" · model 30512042

Rear-Facing ★★★★★ 4–35 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not set for the smallest possible occupant when it was removed from its packaging. A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning.
  • The seat belt path is not completely labeled.
  • It may be possible for the carrier to appear correctly installed on its base when it is not fully or properly installed.
  • The instruction manual was not attached to the car seat when the car seat was removed from the packaging. The instruction manual storage location may be difficult to find and cannot be accessed when the car seat is installed. Instructions for determining seat belt types are present but are incomplete.

Combination

Evenflo Maestro Sport

22–110 lb · up to 57" · model 34912366

Forward-Facing ★★★★★ 22–50 lb, to 50" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled when it was removed from the packaging. A headhugger or body pillow blocks harness slots from being visible. The harness must be rethreaded to adjust for the child's growth as well as to reassemble after cleaning the car seat. To convert the seat to this mode of use, the user may need to refer to the manual as there are multiple complicated steps. There are no illustrations on the label to guide the user through conversion.
  • Supplemental sizing information is given in text only (not illustrated). There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. The belt path is not clearly labeled (labeled only with icons). Labels do not explain how to use LATCH or the tether strap.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. Storage systems for the LATCH attachments and tether strap exist but may be overlooked.
  • The instruction manual was not attached to the car seat when it was removed from its packaging. The instruction manual storage location may be difficult to find and cannot be accessed when the car seat is installed. There is not an overview of acceptable methods of installation provided in the manual.
Booster ★★★★★ 40–110 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • To convert the seat to this mode of use, the user may need to refer to the manual as there are multiple complicated steps. There are no illustrations on the label to guide the user through conversion.
  • Supplemental sizing information is given in text only (not illustrated). Seat belt path labeling is not in contrasting colors and may be difficult to see.
  • The instruction manual storage location may be difficult to find and cannot be accessed when a child is secured in the booster seat.

Infant

Evenflo SecureMax Gold

4–35 lb · up to 32" · model 30412312

Rear-Facing ★★★★★ 4–35 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not set for the smallest possible occupant when the car seat was removed from its packaging. When disassembling for cleaning, loose parts may come off of the seat and could be misplaced.
  • Labels do not explain how to use LATCH.
  • The storage system for the LATCH attachments exists but may be overlooked. There is no label on the carrier that indicates what position the carry handle should be in for vehicle travel.
  • The instruction manual was not attached to the car seat when it was removed from its packaging. The instruction manual storage location may be difficult to find and cannot be accessed when the car seat is installed.

All-in-One

Graco 4Ever with Safety Surround

4–120 lb · up to 57" · model 1948314

Rear-Facing ★★★★★ 4–40 lb, to 57" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The cupholder must be installed prior to using the car seat. To convert to this mode of use from other modes, the user must follow steps given in the manual; there are no illustrations on the car seat depicting the conversion. When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. The user may need to move the seat padding in order to route the belt. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. LATCH attachments have buttons to depress for removal. The storage location for the LATCH belt near the rear-facing belt path is not obvious and may be overlooked.
  • A complete illustration of a child in the car seat is not located next to height/weight sizing information.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • To convert to this mode of use from other modes, the user must follow steps given in the manual; there are no illustrations on the car seat depicting the conversion. When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • The tether is not labeled in the diagram showing an overview of the LATCH belt method of installation. Labels do not explain how to prepare LATCH for use in this mode. Labels do not explain how to use the tether strap.
  • LATCH attachments have buttons to depress for removal.
  • The instruction manual storage location cannot be accessed while the child is secured in the seat. A complete illustration of a child in the car seat is not located next to height/weight sizing information. The tether is not separately labeled in the LATCH installation overview.
Booster ★★★★★ 40–120 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • To convert to this mode of use from other modes, the user must follow steps given in the manual; there are no illustrations on the car seat depicting the conversion. When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • The seat belt path is not completely labeled.
  • The shoulder belt may slip out of the belt guide after multiple uses.
  • The instruction manual storage location cannot be accessed while the child is secured in the seat.

Combination

Graco Atlas 65

22–100 lb · up to 57" · model 1946242

Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The user must read the manual to convert this seat to this mode of use from booster mode; there are labels depicting harness storage, but the label does not show the crotch buckle in the storage compartment.
  • There is not a picture of a child properly restrained in the CRS directly next to sizing information on the labeling. No supplemental sizing information is given on the labels. The labels do not give any indication of how the harness should be adjusted to fit on the child. The labels do not explain how to use either the LATCH belt or the tether strap.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt and/or tether strap is not obvious and may be overlooked.
  • The manual storage location may be difficult to find. No full picture exists of a properly restrained child next to sizing information in the owner's manual. Lap-belt-only usage instructions are not given separately in the belt routing section.
Booster ★★★★★ 30–100 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The user must read the manual to convert this seat to this mode of use from harnessed mode; there are labels depicting harness storage, but the label does not show the crotch buckle in the storage compartment.
  • The shoulder belt portion of the belt path is not labeled.
  • The manual storage location may be difficult to find.

Convertible

Graco Contender 65

5–65 lb · up to 49" · model 1927062

Rear-Facing ★★★★★ 5–40 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path. When reassembling the seat after cleaning, the harness system needs to be rethreaded into the seat.
  • In the diagram showing methods of installation for this mode of use, the car seat is not depicted in a vehicle seat. Labels do not explain how to use LATCH.
  • Interference is possible between a seat component and the seat belt when routing for installation. There are fewer than 3 levels of recline for use in this mode. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle.
  • The instruction manual storage location may be difficult to find. A complete illustration of a child in the car seat is not located next to height/weight sizing information.
Forward-Facing ★★★★★ 20–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path. When reassembling the seat after cleaning, the harness system needs to be rethreaded into the seat.
  • In the diagram showing methods of installation for this mode of use, the car seat is not depicted in a vehicle seat. Labels do not explain how to use LATCH or the tether strap.
  • Interference is possible between a seat component and the seat belt when routing for installation. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the seat is installed. A complete illustration of a child in the car seat is not located next to height/weight sizing information. The tether is not labeled in the illustrations depicting acceptable modes of installation.

Convertible

Graco Contender Slim

5–65 lb · up to 49" · model 2156226

Rear-Facing ★★★★★ 5–40 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. There are fewer than 3 levels of recline for use in this mode. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. A storage system for the LATCH attachments exists, but it may be overlooked.
  • The instruction manual storage location may be difficult to find - the label was imprinted in the dark-colored plastic shell.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • The tether is not labeled on the diagram showing the LATCH installation method. Labels do not explain how to use the tether strap.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. Storage systems for the LATCH attachments and/or tether strap exist, but they may be overlooked.
  • The instruction manual storage location may be difficult to find - the label was imprinted in the dark-colored plastic shell. The instruction manual storage location cannot be accessed when the car seat is installed. The tether is not labeled on the diagram showing the LATCH installation method.

Convertible

Graco Extend2Fit

4–65 lb · up to 49" · model 2216092

Rear-facing ★★★★★ 4–50 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled when it was removed from the packaging. To convert to this mode of use from other modes, the user must follow steps given in the manual; there are no illustrations on the car seat depicting the conversion. The LATCH belt must be rerouted to convert to this mode of use from other modes. The harness must be rethreaded to reassemble after cleaning the car seat.
  • The labels do not contain LATCH preparation illustrations. The labels may not explain the use of the LATCH. The labels do not remind the user to tighten the LATCH.
  • Interference may be possible between the seat belt/LATCH strap and a car seat component. LATCH attachments have buttons to depress for removal. The storage system for the LATCH attachments exists but may be overlooked.
  • The manual storage may be difficult to find. There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. There is no illustration of a child in the CRS. The section describing vehicle seat belt types is incomplete and may be missing important information.
Forward-facing ★★★★★ 26.5–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • To convert to this mode of use from other modes, the user must follow steps given in the manual; there are no illustrations on the car seat depicting the conversion. The LATCH belt must be rerouted to convert to this mode of use from other modes. The harness must be rethreaded to reassemble after cleaning the car seat.
  • The illustration is not next to the sizing information. There is no illustration of a child in the CRS. The belt routing path is not labeled. The labels do not contain LATCH preparation illustrations and may not explain the use of the LATCH. The labels do not remind the user to tighten the LATCH.
  • The caregiver may need to move padding to route the seat belt or LATCH strap. The belt path does not accommodate a 95th percentile male hand. Interference may be possible between the seat belt/LATCH strap and a car seat component. LATCH attachments have buttons to depress for removal. The storage system for the LATCH attachments exists but may be overlooked.
  • The manual cannot be accessed while the car seat is installed in this mode. There is not a full picture of a child properly restrained in the child seat directly next to sizing information. The section describing vehicle seat belt types is incomplete and may be missing important information. The user must read text to route the belt.

Infant

Graco Go Max

4–30 lb · up to 32" · model 2219741

Rear-facing ★★★★★ 4–30 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant when removed from the packaging. Loose parts are generated when the seat is disassembled for cleaning.
  • There are no illustrations on the seat showing how to prepare LATCH for use.
  • There is no labeling to indicate which position the carrier handle should be in while the vehicle is in motion.
  • The instruction manual storage location may be difficult to find. The instruction manual storage location may be difficult to use. No complete illustration of a child in the CRS is shown next to height/weight information. Methods of installation are not completely labeled in the manual. The section describing vehicle seat belt types is incomplete and may be missing important information.

All-in-One

Graco Milestone

5–100 lb · up to 57" · model 2111187

Rear-Facing ★★★★★ 5–40 lb, to 57" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Labels do not explain the use of LATCH.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path, and the user may need to move the seat padding in order to route the belt. Interference is possible between a seat component and the seat belt when routing for installation. There are fewer than three levels of recline for this mode of use. LATCH attachments have buttons to depress for removal.
  • The instruction manual storage location may be difficult to find. No complete illustration of a child in the car seat is shown next to height/weight information. Lap-belt-only usage instructions are not given separately in the belt routing section.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Labels do not explain the use of LATCH. The caregiver may need to read text to use the tether strap. There are no illustrations on the labels showing how to remove the tether from storage.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between a seat component and the seat belt when routing for installation. LATCH attachments have buttons to depress for removal.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the child is secured in the seat. No complete illustration of a child in the car seat is shown next to height/weight information. The tether is not labeled in the illustrations depicting acceptable modes of installation. Lap-belt-only usage instructions are not given separately in the belt routing section.
Booster ★★★★★ 40–100 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • Conversion to this mode of use is simple, but multiple actions are required.
  • The shoulder belt portion of the belt path is not labeled. The warning against using a lap-only belt does not explicitly state that a lap-only belt may not be used.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the child is secured in the seat.

Convertible

Graco Size 4 Me 65

4–65 lb · up to 49" · model 1967059

Rear-Facing ★★★★★ 4–40 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the car seat label showing how to convert to this mode of use from other modes.
  • A full picture of the child in the seat is on the labeling, but it is not directly next to height/weight sizing information. Labels do not explain how to use LATCH.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. There are fewer than 3 levels of recline. LATCH attachments have buttons to depress for removal.
  • The instruction manual storage location may be difficult to find. There is no full picture of the child in the car seat next to height/weight information.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the car seat label showing how to convert to this mode of use from other modes.
  • A full picture of the child in the seat is on the labeling, but it is not directly next to height/weight sizing information. Labels do not explain how to use LATCH or the tether strap.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. LATCH attachments have buttons to depress for removal. When the LATCH belt is routed through the forward-facing belt path and stored, the storage location may be difficult to find - it is not labeled.
  • The instruction manual storage location may be difficult to find and cannot be accessed when the car seat is installed. There is no full picture of the child in the car seat next to height/weight information. The tether is not labeled in the illustration depicting acceptable methods of installation.

All-in-One

Graco Slimfit

5–100 lb · up to 57" · model 2001876

Rear-Facing ★★★★★ 5–40 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The act of converting the car seat to this mode of use is simple, but multiple actions are required.
  • There is no illustration directly next to the sizing info. There is no illustration of a child in the CRS. There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain LATCH use. The labels do not remind user to tighten the LATCH.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. The padding may need to be moved in order to route the belt. Interference may be possible between the seat belt/LATCH strap and a car seat component. There are less than 3 levels of recline.
  • There is no illustration directly next to the sizing info. There is no illustration of a child in the CRS. The lap only belt instructions do not describe how to operate the lock. There were no distinguishing instructions between lap/shoulder and lap belt only belt operations.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The CRS is not set for the youngest mode nor was it fully assembled when removed from the packaging. The act of converting the car seat to this mode of use is simple, but multiple actions are required.
  • There is no illustration directly next to the sizing info. There is no illustration of a child in the CRS. There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain LATCH use. The labels do not remind user to tighten the LATCH. The user must read the text in order to operate the tether. The labels do not explain how to remove the tether.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. The padding may need to be moved in order to route the belt. Interference may be possible between the seat belt/LATCH strap and a car seat component. The lower anchor storage system is not clearly labeled.
  • The instruction manual cannot be accessed in this mode. There is no illustration of a child in the CRS. Supplemental sizing information is given in text only. The lap belt only installation instructions are missing. Instructions do not show how to remove the lower attachments from storage.
Booster ★★★★★ 40–100 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The act of converting the car seat to this mode of use is simple, but multiple actions are required. There are no illustrations demonstrating conversion to this mode.
  • The belt routing path is not labeled.
  • The shoulder belt guide may allow unintentional slack to occur in the seat belt.
  • The instruction manual storage location cannot be accessed when a child is secured in the booster seat.

Infant

Graco SnugRide Lite LX

4–30 lb · up to 32" · model 2220382

Rear-facing ★★★★★ 4–30 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • A headhugger or body pillow blocks harness slots from being visible. Harness slots are misaligned or small. The user must rethread the harness to adjust for the child's growth as well as after cleaning the padding.
  • The belt path does not accommodate a 95th percentile male hand. The lower anchor attachments require twisting to remove from the vehicle. The storage system maybe easily overlooked as it is not clearly labeled. There is no label showing where to put the car seat's carry handle during travel in the vehicle.
  • The manual storage may be difficult to find and the manual cannot be accessed while the car seat is installed in this mode. The section describing vehicle seat belt types is incomplete and may be missing important information.

Infant

Graco SnugRide LX

4–30 lb · up to 32" · model 2220373

Rear-facing ★★★★★ 4–30 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The CRS was not set to the youngest mode when removed from the packaging. Loose parts may be generated when disassembling for cleaning.
  • The belt path does not accommodate a 95th percentile male hand. The recline indicator is a level to ground line. The lower anchor attachments require twisting to remove from the vehicle. The storage system maybe easily overlooked as it is not clearly labeled. There is no label showing where to put the car seat's carry handle during travel in the vehicle.
  • The manual storage may be difficult to find, and the manual cannot be accessed while the car seat is installed in this mode. The section describing vehicle seat belt types is incomplete and may be missing important information.

Combination

Graco Tranzitions

22–100 lb · up to 57" · model 1947464

Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled and ready to use when it was removed from its packaging. There are no labels on the car seat to show how to convert the seat to this mode. To convert to this mode of use, the harness must be rethreaded back into the car seat. The harness must be rethreaded back into the seat to reassemble after the padding is cleaned.
  • Supplemental sizing information is missing from the labels. There is no indication of proper harness height on the labeling. Labels do not explain how to use LATCH or the tether strap.
  • Interference is possible between the vehicle seat belt or LATCH belt and the harness if the harness is loosened when the belt is routed. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage systems for the LATCH attachments and/or tether strap exist, but they may be overlooked.
  • The instruction manual storage area may be difficult to access when the car seat is installed. A complete illustration of a child in the car seat is not located next to height/weight sizing information. Allowable height minimums do not match on the labels vs. in the instruction manual.
Booster ★★★★★ 40–100 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no labels on the car seat to show how to convert the seat to this mode. To convert to this mode of use, the harness must be removed from the car seat. There are no labels on the car seat to show how to convert the seat from highback mode to no back mode.
  • The shoulder belt portion of the belt path is not labeled. The warning against using a lap-only belt does not explicitly state that a lap-only belt may not be used.
  • The instruction manual storage area may be difficult to access when the car seat is installed.

All-in-One

Graco TrioGrow Snuglock LX

5–100 lb · up to 57" · model 2087706

Rear-Facing ★★★★★ 5–40 lb, to 57" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The cupholder must be installed prior to using the car seat. When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling.
  • The user may need to move the seat padding in order to route the belt. Interference is possible between a seat component and the seat belt when routing for installation. LATCH attachments have buttons to depress for removal.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling.
  • The user may need to move the seat padding in order to route the belt. LATCH attachments have buttons to depress for removal. The storage location(s) for the LATCH belt and/or tether strap are not obvious and may be overlooked.
  • The instruction manual storage location cannot be accessed while the child is secured in the seat. The tether is not separately labeled in the LATCH installation overview.
Booster ★★★★★ 40–100 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • Most steps to convert the car seat to this mode are shown on the labels, but the buckle removal step is not shown.
  • The seat belt path is not completely labeled. The warning against using a lap-only belt does not explicitly state that a lap-only belt may not be used.
  • The instruction manual storage location cannot be accessed while the child is secured in the seat.

All-in-One

Graco Triride

5–100 lb · up to 57" · model 2140187

Rear-Facing ★★★★★ 5–40 lb, to 57" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The cupholder must be installed prior to using the car seat. When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling.
  • Interference is possible between a seat component and the seat belt when routing for installation. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle.
  • Lap-belt-only installation method is not shown separately in the section depicting an overview of available installation types.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. The tether is not labeled in the diagram showing an overview of the LATCH belt method of installation.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The tether storage area is not clearly labeled and may be overlooked.
  • The instruction manual storage location cannot be accessed while the child is secured in the seat. The tether is not separately labeled in the LATCH installation overview.
Booster ★★★★★ 40–100 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • It is simple to store the harness within the seat, but multiple actions are required.
  • The seat belt path is not completely labeled. The warning against using a lap-only belt does not explicitly state that a lap-only belt may not be used.
  • The instruction manual storage location cannot be accessed while the child is secured in the seat.

Booster

Graco Turbobooster LX with True Shield

40–110 lb · up to 57" · model 1993145

Booster ★★★★★ 40–110 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled and ready to use when it was removed from the packaging. There are no illustrations showing how to convert the car seat from high back mode to low back mode.
  • The shoulder belt path is not labeled. The labels do not explicitly state that a lap-only belt may not be used with this car seat.
  • The instruction manual storage location may be difficult to find, and it cannot be accessed while the child is secured in the seat.

Combination

Graco Wayz

22–100 lb · up to 57" · model 2100786

Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled when it was removed from the packaging. The harness must be rethreaded to reassemble after cleaning the car seat. To convert the seat to this mode of use, the user may need to refer to the manual as there are multiple complicated steps. There are no illustrations on the label to guide the user through conversion.
  • Supplemental sizing information is missing from the labels. There is no indication of proper harness height on the labeling. Labels do not explain how to use LATCH or the tether strap.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. Storage systems for the LATCH attachments and tether strap exist but may be overlooked.
  • The instruction manual storage location cannot be accessed when the car seat is installed. A complete illustration of a child in the car seat is not located next to height/weight sizing information. Allowable height minimums do not match on the labels vs. in the instruction manual.
Booster ★★★★★ 40–100 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no labels on the car seat to show how to convert the seat to this mode. To convert to this mode of use, the harness must be removed from the car seat. There are no labels on the car seat to show how to convert the seat from highback mode to no back mode.
  • The shoulder belt portion of the belt path is not labeled. The warning against using a lap-only belt does not explicitly state that a lap-only belt may not be used.
  • The instruction manual storage area may be difficult to access when the car seat is installed.

Infant

Joie Mint

4–30 lb · up to 30" · model C2304BAEVG900

Rear-facing ★★★★★ 4–30 lb, to 30" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness chest clip is not labeled with instructions for proper placement. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning, and loose parts may be generated during these processes.
  • There is not a full picture of a child properly restrained in the child safety directly next to the sizing information on the label.
  • A printed/molded line is present on the restraint that must be leveled to the ground. There is no labeling to indicate which position the carrier handle should be in while the vehicle is in motion.
  • No complete illustration of a child in the CRS is shown next to height/weight information. The airbag warning is buried in text.

Infant

Joie Rue

4–30 lb · up to 30" · model I2320AASHA900

Rear-facing ★★★★★ 4–30 lb, to 30" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness chest clip is not labeled with instructions for proper placement. The harness must be rethreaded to adjust for the child's growth. Loose pieces are generated when adjusting for child growth. The harness must be rethreaded when reassembling the car seat after cleaning. Loose parts are generated when the seat is disassembled for cleaning.
  • There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain the use of LATCH in detail. The labels do not remind the user to tighten the LATCH belt.
  • A printed/molded line is present on the restraint that must be leveled to the ground. The lower anchors have buttons to depress for removal from the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked. There is no labeling to indicate which position the carrier handle should be in while the vehicle is in motion.
  • The manual cannot be accessed while the car seat is installed in this mode and the child is in the car seat. The warning to avoid placing a rear-facing child restraint in front of an active airbag is buried within a bulleted list. The section describing vehicle seat belt types is incomplete and may be missing important information.

Infant

Maxi-Cosi Mico 30

5–30 lb · up to 32" · model IC301FXQ

Rear-Facing ★★★★★ 5–30 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not set for the smallest possible occupant when the car seat was removed from its packaging. A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth.
  • There are no illustrations on the seat showing how to prepare LATCH for use.
  • There is a line printed on the seat that must be leveled to ground. LATCH attachments have buttons to depress for removal.
  • The instruction manual was not attached to the car seat when it was removed from its packaging. The instruction manual storage location may be difficult to find and cannot be accessed while the seat is installed. A complete illustration of a child in the car seat is not located next to height/weight sizing information.

Infant

Maxi-Cosi Mico Luxe

4–30 lb · up to 32" · model IC365GYKH

Rear-Facing ★★★★★ 4–30 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The CRS was not fully set to the youngest mode when removed from the packaging. The harness was located in the second-to-last slot. The harness system cannot be accessed when installed in a vehicle. The harness cannot be tightened when the seat is installed without the base. The headhugger/body pillow blocks the harness slots. The harness may be difficult to adjust. The harness must be rethreaded to adjust for the child's growth. Loose parts could be generated for height adjustments, including the harness clip and buckles.
  • The belt routing path labeling is not contrasting. There are no illustrations for LATCH preparation. The labels do not illustrate how to unattach the latches from the stored position.
  • There is a level to the ground line.
  • The manual was not attached to the seat; it was found tucked under the harness. The manual storage may be difficult to find and use, and may fall out of the carrier. Sizing information is found across various pages in the manual. Some illustrations of the base installation were not included in the manual. There is no lap belt-only information found in the manual. The illustrations do not separate the lap belt-only illustration from the lap/shoulder belt illustration. The instructions don't show how to remove the tether strap from storage and prepare it for use. The safest place and airbag warnings are on separate pages in the manual.

Infant

Maxi-Cosi Mico XP Max

4–30 lb · up to 32" · model IC337FZG

Rear-Facing ★★★★★ 4–30 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not set for the smallest possible occupant when the car seat was removed from its packaging. A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth.
  • The lap/shoulder belt and lap-only belt installation diagrams on the label are not separately labeled. The seat belt lockoff is labeled in the center, but the rest of the belt path is not labeled on the sides to show where the belt should be threaded through.
  • LATCH attachments have buttons to depress for removal.
  • The instruction manual was not attached to the car seat when it was removed from its packaging. The instruction manual storage location may be difficult to find and cannot be accessed while the seat is installed. A complete illustration of a child in the car seat is not located next to height/weight sizing information.

Booster

Maxi-Cosi RodiFix

40–120 lb · up to 57" · model BC147-FZH

Booster ★★★★★ 40–120 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • Supplemental sizing information is given in text only on the labels. In the diagram showing methods of installation for this mode of use, the car seat is not depicted in a vehicle seat. The seat belt routing path is not completely labeled.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the child is secured in the seat.

Booster

Maxi-Cosi RodiSport

40–100 lb · up to 57" · model BC152FNC

Booster ★★★★★ 40–100 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations on the label showing how to convert the booster from highback to no back mode. However, the actions required are simple.
  • Supplemental sizing information is given in text only on the labeling (not illustrated). The belt routing path is not completely labeled.
  • The shoulder belt guide may allow unintentional slack to occur in the seat belt.
  • The instruction manual storage location may be difficult to find and use.

Booster

Nuna aace

40–120 lb · up to 60" · model CS07007GRN

Booster ★★★★★ 40–120 lb, to 60" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled and ready to use when it was removed from its packaging. There are no labels on the car seat to show how to convert the seat from highback mode to no back mode.
  • The warning against using a lap-only belt is not illustrated.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the car seat is installed and a child is seated in this mode. The indication that the rear seat is the safest place for children is buried amongst other text.

Infant

Nuna Pipa rx

4–32 lb · up to 32" · model CF12508607BLK

Rear-Facing ★★★★★ 4–32 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness clip is not labeled. The harness must be rethreaded to adjust the height level.
  • There is no illustration directly next to the sizing info. There is no illustration of a child in the CRS. The belt routing path is obscured and is not labeled. There are no LATCH preparation illustrations.
  • The base does not have 3 levels of recline for this mode. There is a line printed on the seat that must be leveled to ground. The lower anchor storage system is not clearly labeled. There is no labeling to indicate which position the carrier handle should be placed while in the vehicle.
  • The instruction manual storage location may be difficult to find or cannot be accessed when the car seat is installed. All the methods of installing the seat are not labeled. The airbag warning is buried in text. The instructions for determining the vehicle seatbelt type are present but are incomplete.

All-in-One

Safety 1st Continuum

5–80 lb · up to 52" · model CC137-DSLA

Rear-Facing ★★★★★ 5–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not set for the smallest possible occupant when the car seat was removed from its packaging. A headhugger or body pillow blocks harness slots from being visible. In order to use the lowest harness height, the harness must be rethreaded. If the padding needs to be cleaned while using the harness in the lowest height, the harness must be rethreaded during reassembly. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. After using this car seat as a booster, the buckle must be reinserted into the seat. There are no illustrations on the car seat label showing how to convert to this mode of use from other modes.
  • Supplemental sizing information is missing from the labels. There is no indication of proper harness height on the labeling. The belt path is only labeled on one side. Labels do not explain how to use LATCH.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. There is a line printed on the seat that must be leveled to ground. There are fewer than 3 levels of recline for use in this mode. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage system for the LATCH attachments exists but may be overlooked.
  • The instruction manual was not attached to the car seat when it was removed from its packaging. The instruction manual storage location may be difficult to find.
Forward-Facing ★★★★★ 22–50 lb, to 45" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path. After using this car seat as a booster, the buckle must be reinserted into the seat. There are no illustrations on the car seat label showing how to convert to this mode of use from other modes.
  • Supplemental sizing information is missing from the labels. There is no indication of proper harness height on the labeling. Labels do not explain how to use LATCH.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage systems for the LATCH attachments and/or tether strap exist but may be overlooked.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the car seat is installed in this mode.
Booster ★★★★★ 40–80 lb, to 52" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt may need to be rerouted through the belt path and the buckle must be removed from the seat. There are no illustrations on the car seat label showing how to convert to this mode of use from other modes.
  • Supplemental sizing information is missing from the labels. In the diagram showing methods of installation for this mode of use, the car seat is not depicted in a vehicle seat. The belt routing path is not completely labeled.
  • The shoulder belt guide may allow unintentional slack to occur in the seat belt.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the car seat is installed and a child is seated in this mode.

Convertible

Safety 1st Getaway

5–40 lb · up to 43" · model cc333-gccz

Rear-Facing ★★★★★ 5–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The CRS is not set for the youngest mode when removed from the packaging. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning. Loose pieces are generated when adjusting the harness height and for cleaning. There are many complicated steps when converting the CRS to RF mode. The user must read the manual when converting the CRS to RF mode. Illustrations of converting to RF mode are missing from the label and the flexible latch belt must be rerouted.
  • The LATCH illustrations are unclear. There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain the LATCH use. The labels do not remind the user to tighten LATCH.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. There is a line printed on the seat that must be leveled to ground. There are fewer than three levels of recline for this mode of use. The user must twist the lower anchors to remove them from the vehicle. The storage system for the lower attachments is not clearly labeled and may be easily overlooked.
  • The manual was not attached to the seat upon arrival. The manual cannot be accessed in this mode. The storage system may be difficult to locate and operate. The warning indicating that the safest place in a vehicle for children is the rear seat is buried in text.
Forward-Facing ★★★★★ 22–40 lb, to 43" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness system may be difficult to adjust. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning. Loose pieces are generated when adjusting the harness height and for cleaning. Illustrations of converting to FF mode are missing from the label. The flexible latch belt must be rerouted.
  • There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not illustrate how to remove the tether. The labels do not explain the LATCH use. The labels do not remind the user to tighten LATCH.
  • The user must twist the lower anchors to remove them from the vehicle. The storage system for the lower attachments is not clearly labeled and may be easily overlooked.
  • The storage system for the manual may be difficult to locate and operate. The manual cannot be accessed in this mode. The warning indicating that the safest place in a vehicle for children is the rear seat is buried in text and not separate from unrelated warnings.

Infant

Safety 1st onBoard 35 Air 360

4–35 lb · up to 32" · model IC263-DYT

Rear-Facing ★★★★★ 4–35 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant when removed from the packaging. A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning. Loose mandatory parts may be generated during the cleaning process.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Labels do not explain the use of LATCH.
  • The carrier may appear to be correctly installed/attached when it is not. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The instruction manual storage location cannot be accessed while the car seat is installed in the vehicle.

Convertible

Baby Trend Trooper

4–65 lb · up to 50" · model CV01D07B

Rear-Facing ★★★★★ 4–40 lb, to 50" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning. There are no illustrations given on the car seat to show conversion to this mode from another mode of use. When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • Supplemental sizing information is missing from the labels. Harness slots are not labeled to detail which may be used rear-facing.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. There are fewer than 3 levels of recline available for rear-facing installation. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle.
  • The instruction manual storage location may be difficult to find.
Forward-Facing ★★★★★ 23–65 lb, to 50" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning. There are no illustrations given on the car seat to show conversion to this mode from another mode of use. When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • Harness slots are not labeled to detail which may be used forward-facing.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. Interference may be possible between the seat belt/LATCH strap and a car seat component. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle.
  • The instruction manual storage location may be difficult to find.

Convertible

Baby Trend Trooper Slim 3 in 1

4–65 lb · up to 50" · model CV01F00C

Rear-facing ★★★★★ 4–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant when removed from the packaging. The harness slots are small or misaligned. A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning, and loose parts may be generated during these processes. To convert this seat to rear-facing mode from another mode of use, multiple actions are required, but they are simple. There are no illustrations on the seat depicting the conversion to rear-facing mode.
  • There is not a full picture of a child properly restrained in the child safety directly next to the sizing information on the label.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. The user may need to move the seat padding in order to route the LATCH belt or seat belt. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. There are less than three levels of recline available for this mode of use. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle.
  • The instruction manual storage location may be difficult to find. The instruction manual storage location may be difficult to use. The user must read the text to route the belt. The manual doesn't show how to remove LATCH attachments from storage.
Forward-facing ★★★★★ 30–65 lb, to 50" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness slots are small or misaligned. It may be difficult to adjust the harness. The harness must be rethreaded to adjust for the child's growth as well as for reassembly after cleaning. Loose parts may be generated when disassembling for cleaning. To convert this seat to forward-facing mode from another mode of use, multiple actions are required, but they are simple. There are no illustrations on the seat depicting the conversion to forward-facing mode.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. The user may need to move the seat padding in order to route the LATCH belt or seat belt. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle.
  • The instruction manual storage location may be difficult to find. The instruction manual storage location may be difficult to use. The user must read the text to route the belt. The manual doesn't show how to remove LATCH attachments from storage.

Infant

Chicco KeyFit 30

4–30 lb · up to 30" · model 87002040070

Rear-facing ★★★★★ 4–30 lb, to 30" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness clip itself is not labeled. A headhugger or body pillow blocks harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning.
  • Additional sizing info is missing. Must read text in order to route vehicle seatbelt properly. There is no indication of correct harness slot height given on the labeling. The labels do not contain LATCH preparation illustrations. The labels may not explain the use of the LATCH. The labels do not remind the user to tighten the LATCH.
  • LATCH attachments have buttons to depress for removal. The storage location for the LATCH belt is not obvious and may be overlooked. There is no label showing where to put the car seat's carry handle during travel in the vehicle.
  • The instruction manual storage location may be difficult to find and use.

All-in-One

Chicco OneFit ClearTex

5–100 lb · up to 57" · model 79741040070

Rear-Facing ★★★★★ 5–40 lb, to 43" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness clip is not labeled. The designated slots are not labeled for each use. The fit for the chest clip is not clearly indicated. There are no illustrations on the car seat label showing how to convert to this mode of use from other modes. Multiple steps are required to convert the seat to this mode, and the user may need to refer to the instruction manual. When converting to this mode, the flexible LATCH belt must be rerouted through The cup holders need to be removed for cleaning, generating loose parts.
  • Supplemental sizing information is provided in text only. There is no indication of the proper positioning of the child’s head on the labeling. There is no full picture of a child properly restrained in the child seat directly next to the sizing information on the labeling. The height information is buried deep in the text. The belt routing path is obscured by the seat padding. The labels do not remind the user to tighten the LATCH.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. The padding may need to be moved in order to route the belt. Seat belt interference with crotch buckle but not when installed with lower anchors. The belt positioning feature or lockoff is simple to use, but the user must refer to the owner's manual for complete instructions. There is a line printed on the seat that must be leveled to ground. Does not show that recline levels 1-4 need to be used for rear facing on the seat. LATCH attachments have buttons to depress for removal.
  • Supplemental sizing information is provided in text only. The shoulder strap height position warning information is included, but there is no minimum height information. The user may need to read the text to properly route the belt. The instructions do not indicate how to lock the lap-only belt.
Forward-Facing ★★★★★ 25–65 lb, to 54" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness clip is not labeled. To convert the seat to this mode of use, the user may need to refer to the manual; There are many complicated steps. There are no illustrations on the car seat to show the conversion from other modes of use, and the flexible LATCH belt must be rerouted. Loose parts may be generated when disassembling for cleaning.
  • Supplemental sizing information is provided in text only. There is no full picture of a child properly restrained in the child seat directly next to the sizing information on the labeling. The labels do not explain LATCH use. The labels do not remind the user to tighten the LATCH. The label does not show how to remove the tether.
  • The user may need to move padding to route the seat belt or LATCH strap. Interference is possible between a seat component and the seat belt when routing for installation. The seat belt lockoff/guide is simple to use, but the user may need to refer to the owner's manual for complete instructions. The LATCH attachments have buttons to depress for removal.
  • Supplemental sizing information is provided in text only. The seat is not labeled with a final view of installation. The instructions for determining the vehicle seatbelt type are present but incomplete. The user must read the text to route the LATCH and use the tether. While the CRS is in this mode, the manual cannot be accessed.
Booster ★★★★★ 40–100 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations on the car seat label showing how to convert to this mode of use from other modes. Multiple steps are required to convert the seat to this mode, and the user may need to refer to the instruction manual. When converting to this mode, the flexible LATCH belt must be rerouted through. Loose parts may be generated when disassembling for cleaning.
  • Supplemental sizing information is provided in text only (not illustrated). The warning against using a lap-only belt is neither written nor illustrated.
  • The shoulder belt guide may allow unintentional slack to occur in the seat belt.
  • The instruction manual storage location cannot be accessed when the car seat is installed. Supplemental sizing information is provided in text only (not illustrated) in the manual. The warning against using a lap-only belt is not included in the belt routing section of the manual.

Convertible

Clek Fllo

14–65 lb · up to 49" · model fl19u1

Rear-facing ★★★★★ 14–50 lb, to 43" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat is not set for the youngest mode when removed from the packaging. The harness must be rethreaded to adjust for height for the child's growth. Illustrations of converting to RF mode are missing from the label, and there are many complicated steps requiring the user to read the manual. The flexible LATCH must be rerouted. Loose parts are generated when disassembling for cleaning.
  • There are no illustrations on the seat showing how to prepare LATCH preparation for use. The labels do not explain the use of LATCH or remind the user to tighten LATCH. The labels are peeling out of the packaging.
  • The padding needs to be removed in order to route the seat belt or LATCH. The car seat lock-off is confusing. The recline indicator is a level to ground line, and there are less than three levels of recline. The lower anchors have buttons to depress for removal from the vehicle, and the LATCH storage system is not clearly labeled.
  • The child sizing illustration is not directly next to the sizing information. The methods of installation are not labeled. The airbag warning is buried in bulleted text and the warning is not illustrated in the manual. The instructions must be read to route the seat belt and LATCH.
Forward-facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat is not fully assembled when removed from packaging. The seat is not set for the youngest mode when removed from the packaging. The harness must be rethreaded to adjust for height for the child's growth. Illustrations of converting to FF mode are missing from the label, and there are many complicated steps requiring the user to read the manual. The flexible LATCH must be rerouted. Loose parts are generated when disassembling for cleaning.
  • The tether is not labeled on the car seat labels. The belt routing path is obscured. There are no illustrations on the seat showing how to prepare the LATCH for use. The labels do not explain the use of LATCH or remind the user how to tighten LATCH. There are no instructions provided on the labels showing how to prepare and use the tether.
  • Interference with the harness is possible when routing the seat belt or LATCH straps. The car seat lock-off is simple to use, but the user must read the manual. The lower anchors have buttons to depress for removal from the vehicle, and the LATCH storage system is not clearly labeled.
  • The instruction manual cannot be accessed when stored on the car seat. The methods of installing the car seat or how to use the tether are not labeled. The user must read the text to route the LATCH.

Infant

Clek Liingo

4–35 lb · up to 32" · model LGO20U1

Rear-Facing ★★★★★ 4–35 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant when removed from the packaging. A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning.
  • In the diagram showing methods of installation for this mode of use, the car seat is not depicted in a vehicle seat. The belt path is not completely labeled. There are no illustrations on the seat showing how to prepare LATCH for use.
  • There are fewer than three levels of recline for this mode of use. There is a line printed on the seat that must be leveled to ground. LATCH attachments have buttons to depress for removal. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The instruction manual storage location may be difficult to find.

Booster

Clek Oobr

40–100 lb · up to 57" · model S22146826

Booster ★★★★★ 40–100 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled for the smallest occupant when it was removed from its packaging. There are no illustrations on the label showing how to convert this booster seat from highback to no back mode. When disassembling for cleaning, important parts may become loose and could be misplaced.
  • The two diagrams showing methods of installation for this seat (highback and no back) are not labeled. The seat belt path is not completely labeled.
  • It is simple to position the shoulder belt using the belt guide, but it may require two hands.
  • The instruction manual storage location may be difficult to find and cannot be accessed when a child is secured in the booster seat. The warning against using a lap-only belt is not illustrated in the belt routing section of the manual.

Convertible

Cosco Apt 50

5–50 lb · up to 43" · model CC147-DFL

Rear-Facing ★★★★★ 5–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant when removed from the packaging. The harness must be rethreaded to adjust height for the child's growth. There are no illustrations given on the car seat to show conversion to this mode from another mode of use. When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • Labels do not explain the use of LATCH and do not remind the user to tighten the LATCH belt.
  • Interference is possible between a seat component and the seat belt when routing for installation. There are fewer than three levels of recline for this mode of use. There is a line printed on the seat that must be leveled to ground. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The owner's manual was not attached to the car seat when it was removed from its packaging. The instruction manual storage location may be difficult to find, and it cannot be accessed while the child is secured in the seat. No complete illustration of a child in the car seat is shown next to height/weight information.
Forward-Facing ★★★★★ 22–50 lb, to 43" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness must be rethreaded to adjust height for the child's growth. There are no illustrations given on the car seat to show conversion to this mode from another mode of use. When converting to this mode of use, the LATCH belt must be rerouted through the belt path.
  • Labels do not explain the use of LATCH and do not remind the user to tighten the LATCH belt. Labels do not show how to prepare the LATCH belt and tether strap for use.
  • Interference is possible between a seat component and the seat belt when routing for installation. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage locations for the LATCH belt and/or tether strap are not obvious and may be overlooked.
  • The instruction manual storage may be difficult to find. No complete illustration of a child in the car seat is shown next to height/weight information.

Infant

Cosco Light 'n' Comfy

4–22 lb · up to 29" · model IC207-EDR

Rear-Facing ★★★★★ 4–22 lb, to 29" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant when removed from the packaging. The shoulder portions of the harness buckle (buckle tongues) must be held together by the user when inserted into the buckle. A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth.
  • There are no illustrations on the seat showing how to prepare LATCH for use.
  • It may be possible for the carrier to appear correctly installed in the base when it is not (placed backward). There are fewer than three levels of recline for this mode of use. There is a line printed on the seat that must be leveled to ground. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the child is secured in the seat. A complete illustration of a child in the car seat is not located next to height/weight sizing information.

Convertible

Cosco MightyFit 65

5–65 lb · up to 49" · model CC177-EGA

Rear-Facing ★★★★★ 5–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not set for the smallest occupant when it was removed from packaging. A headhugger or body pillow blocks harness slots from being visible. Harness slots are misaligned or small. The user must rethread the harness to adjust for the child's growth as well as after cleaning the padding. To convert the seat to this mode of use, the user may need to refer to the manual as there are multiple complicated steps. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the label to guide the user through conversion.
  • Labels do not explain how to use LATCH.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. There is a line printed on the seat that must be leveled to ground. There are fewer than 3 levels of recline available. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. A storage system for the LATCH attachments exists, but it may be overlooked.
  • The instruction manual storage location may be difficult to find. A complete illustration of a child in the car seat is not located next to height/weight sizing information.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • A headhugger or body pillow blocks harness slots from being visible. Harness slots are misaligned or small. The user must rethread the harness to adjust for the child's growth as well as after cleaning the padding. To convert the seat to this mode of use, the user may need to refer to the manual as there are multiple complicated steps. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the label to guide the user through conversion.
  • The belt routing path is only labeled on one side. Labels do not explain how to use LATCH. Labels do not show how to remove the tether strap from storage and prepare it for use.
  • The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. Storage systems for the LATCH attachments and/or tether strap exist, but they may be overlooked.
  • The instruction manual storage location may be difficult to find. A complete illustration of a child in the car seat is not located next to height/weight sizing information. Instructions don't show how to remove the tether strap from storage and prepare it for use.

Convertible

Cosco Scenera Next

5–40 lb · up to 43" · model CC145-DEN

Rear-Facing ★★★★★ 5–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant when removed from the packaging. The harness must be rethreaded to adjust for the child's growth as well as to reassemble after cleaning the car seat. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations given on the car seat to show conversion to this mode from another mode of use.
  • Harness slots are not individually labeled to indicate whether they may be used in this mode. Labels do not explain how to use LATCH.
  • Interference is possible between a seat component and the seat belt when routing for installation. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. There are fewer than three levels of recline for this mode of use. There is a line printed on the seat that must be leveled to ground.
  • The instruction manual storage location may be difficult to find and use. A complete illustration of a child in the car seat is not located next to height/weight sizing information.
Forward-Facing ★★★★★ 22–40 lb, to 43" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness must be rethreaded to adjust for the child's growth as well as to reassemble after cleaning the car seat. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations given on the car seat to show conversion to this mode from another mode of use.
  • Harness slots are not individually labeled to indicate whether they may be used in this mode. Labels do not explain how to use LATCH. Labels do not show how to remove tether. The seat belt/LATCH belt path is clearly labeled on only one side.
  • Interference is possible between a seat component and the seat belt when routing for installation. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The tether storage location is not clearly labeled.
  • The instruction manual storage location may be difficult to find and use, and it cannot be accessed while the child is secured in the seat. A complete illustration of a child in the car seat is not located next to height/weight sizing information.

Booster

Diono Monterey 4DXT

40–120 lb · up to 63" · model 10833-US-01

Booster ★★★★★ 40–120 lb, to 63" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled for the smallest occupant when it was removed from its packaging. There are no illustrations on the label showing how to convert this booster seat from highback to no back mode.
  • The seat belt routing path is not completely labeled. The warning against using a lap-only belt does not explicitly state that a lap-only belt may not be used.
  • The instruction manual storage location may be difficult to find. A complete illustration of a child in the car seat is not located next to height/weight sizing information. Supplemental sizing information is given in text only (not illustrated). In diagrams showing methods of installation, the booster seat is not depicted in a vehicle seat. The warning against using a lap-only belt is not provided in the belt routing section of the manual.

All-in-One

Diono Radian 3QX

4–120 lb · up to 57" · model 50321-NA-01

Rear-Facing ★★★★★ 4–50 lb, to 44" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant and was not fully assembled when removed from the packaging. Harness slots in the pad and in the shell are misaligned or small. The harness must be rethreaded to adjust for the child's growth as well as after cleaning the seat padding. When converting to this mode of use, there are multiple complicated steps to follow that must be followed in the manual. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. When converting to this mode of use after using as a booster for an older child, the harness must be rethreaded into the seat. Loose parts may be generated when disassembling for cleaning.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. No indication of correct harness height relative to the child is given on the labels. The labels do not explain how to use LATCH in detail.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. There is no angle feedback device on the seat to help a caregiver properly adjust the angle of installation. There are fewer than three levels of recline for this mode of use.
  • No complete illustration of a child in the car seat is shown next to height/weight information. Instructions for determining seat belt types are present but are incomplete.
Forward-Facing ★★★★★ 22–65 lb, to 57" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • Harness slots in the pad and in the shell are misaligned or small. The harness must be rethreaded to adjust for the child's growth as well as after cleaning the seat padding. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. When converting to this mode of use after using as a booster for an older child, the harness must be rethreaded into the seat. Loose parts may be generated when disassembling for cleaning.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. The tether is not labeled in the diagrams showing overviews of the different methods of installation. No indication of correct harness height relative to the child is given on the labels. The labels do not explain how to use LATCH and the tether strap in detail.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component.
  • The instruction manual storage location cannot be accessed while the child is secured in the seat. No complete illustration of a child in the car seat is shown next to height/weight information. The tether is not labeled in the illustrations depicting acceptable modes of installation. The warning that the rear seat is the safest place in a vehicle for children is located amongst other warnings. Instructions for determining seat belt types are present but are incomplete.
Booster ★★★★★ 40–120 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations given on the car seat to show conversion to this mode from another mode of use, and the harness must be completely removed from the seat. Loose parts may be generated when disassembling for cleaning.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. Methods of installing this seat in this mode of use are not depicted on the labels. The seat belt path is not completely labeled. The warning against using a lap-only belt is given in text only (not illustrated).
  • The shoulder belt guide may allow unintentional slack to occur in the seat belt.
  • The instruction manual storage location cannot be accessed while the child is secured in the seat. No complete illustration of a child in the car seat is shown next to height/weight information. The warning that the rear seat is the safest place in a vehicle for children is located amongst other warnings.

All-in-One

Diono Radian 3QXT

4–120 lb · up to 57" · model 51224-NA-01

Rear-Facing ★★★★★ 4–50 lb, to 44" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant and was not fully assembled when removed from the packaging. Harness slots in the pad and in the shell are misaligned or small. The harness must be rethreaded to adjust for the child's growth as well as after cleaning the seat padding. When converting to this mode of use, there are multiple complicated steps to follow that must be followed in the manual. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. When converting to this mode of use after using as a booster for an older child, the harness must be rethreaded into the seat. Loose parts may be generated when disassembling for cleaning.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. No indication of correct harness height relative to the child is given on the labels. The labels do not explain how to use LATCH in detail.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. There is no angle feedback device on the seat to help a caregiver properly adjust the angle of installation. There are fewer than three levels of recline for this mode of use.
  • No complete illustration of a child in the car seat is shown next to height/weight information. Instructions for determining seat belt types are present but are incomplete.
Forward-Facing ★★★★★ 22–65 lb, to 57" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • Harness slots in the pad and in the shell are misaligned or small. The harness must be rethreaded to adjust for the child's growth as well as after cleaning the seat padding. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. When converting to this mode of use after using as a booster for an older child, the harness must be rethreaded into the seat. Loose parts may be generated when disassembling for cleaning.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. The tether is not labeled in the diagrams showing overviews of the different methods of installation. No indication of correct harness height relative to the child is given on the labels. The labels do not explain how to use LATCH and the tether strap in detail.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component.
  • The instruction manual storage location cannot be accessed while the child is secured in the seat. No complete illustration of a child in the car seat is shown next to height/weight information. The tether is not labeled in the illustrations depicting acceptable modes of installation. The warning that the rear seat is the safest place in a vehicle for children is located amongst other warnings. Instructions for determining seat belt types are present but are incomplete.
Booster ★★★★★ 40–120 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations given on the car seat to show conversion to this mode from another mode of use, and the harness must be completely removed from the seat. Loose parts may be generated when disassembling for cleaning.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. Methods of installing this seat in this mode of use are not depicted on the labels. The seat belt path is not completely labeled. The warning against using a lap-only belt is given in text only (not illustrated).
  • The shoulder belt guide may allow unintentional slack to occur in the seat belt.
  • The instruction manual storage location cannot be accessed while the child is secured in the seat. No complete illustration of a child in the car seat is shown next to height/weight information. The warning that the rear seat is the safest place in a vehicle for children is located amongst other warnings.

All-in-One

Diono Radian 3QXT+

4–120 lb · up to 57" · model 53000-NA-01

Rear-Facing ★★★★★ 4–50 lb, to 44" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled for the smallest occupant when it was removed from its packaging. A headhugger or body pillow blocks harness slots from being visible. Harness slots are misaligned or small. The user must rethread the harness to adjust for the child's growth as well as after cleaning the padding. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the label to guide the user through conversion.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. There is no indication of proper harness height on the labeling. Labels do not explain how to use LATCH.
  • It may be uncomfortable for those with larger hands to route the LATCH belt or seat belt through the belt path. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. There is no feedback device to help the user achieve a proper angle of installation. There are fewer than 3 levels of recline adjustment available.
  • A complete illustration of a child in the car seat is not located next to height/weight sizing information. Supplemental sizing information is given in text only (not illustrated). Instructions for determining seat belt types are present but are incomplete.
Forward-Facing ★★★★★ 22–65 lb, to 57" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • Harness slots are misaligned or small. The user must rethread the harness to adjust for the child's growth as well as after cleaning the padding. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the label to guide the user through conversion.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. The tether is not labeled in the diagrams showing overviews of the different methods of installation. There is no indication of proper harness height on the labeling. Labels do not explain how to use LATCH or the tether strap.
  • It may be uncomfortable for those with larger hands to route the LATCH belt or seat belt through the belt path.
  • The instruction manual storage location cannot be accessed when the car seat is installed. A complete illustration of a child in the car seat is not located next to height/weight sizing information. The tether is not labeled in the diagrams showing acceptable methods of installation. Instructions for determining seat belt types are present but are incomplete.
Booster ★★★★★ 40–120 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the harness must be removed from the car seat. There are no illustrations on the label to guide the user through conversion.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. There is no overview of acceptable installation methods provided on the labeling. The seat belt routing path is not completely labeled. The warning against using a lap-only belt is not illustrated.
  • The shoulder belt guide may allow unintentional slack to develop in the seat belt.
  • The instruction manual storage location cannot be accessed when the car seat is installed. A complete illustration of a child in the car seat is not located next to height/weight sizing information. Supplemental sizing information is given in text only (not illustrated). The diagram showing the correct installation method for this booster doesn't show the booster seat on a vehicle seat. The steps for routing the lap/shoulder belt are not sufficiently illustrated.

Combination

Evenflo Chase LX

30–100 lb · up to 57" · model CS500111870

Forward-facing ★★★★★ 30–40 lb, to 50" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • A headhugger or body pillow blocks the harness slots from being visible. Harness slots in the pad and in the shell are misaligned or small. The harness must be rethreaded to adjust for the child's growth as well as after cleaning the seat padding. There are no labels on the car seat to show how to convert the seat from forward-facing mode to booster mode. Loose parts may be generated when disassembling for cleaning.
  • The additional sizing information is provided in text only. The label does not indicate the harness slot height. The belt path is only labeled on one side. The belt routing path labeling is not contrasting from the car seat shell. The labels may not explain the use of the LATCH. The labels do not remind the user to tighten the LATCH. There are no instructions provided on the labels showing how to prepare and use the tether.
  • Interference is possible between a seat component and the seat belt when routing for installation. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle.
  • The owner's manual was not attached to the car seat when it was removed from its packaging. The owner's manual storage location may be difficult to find. Installation methods are not labeled in the instructions. The section describing vehicle seat belt types is incomplete and may be missing important information. The user must read text to properly route the LATCH strap. The names on the seat and manual do not match.
Booster ★★★★★ 40–100 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations on the label showing how to convert the car seat to booster mode from other modes of use. To convert the seat to this mode of use, the user may need to refer to the manual; There are many complicated steps.
  • The additional sizing information is provided in text only. The warning against using a lap-only belt does not explicitly state that a lap-only belt may not be used.
  • The shoulder belt may slip out of the shoulder belt positioning device.
  • The owner's manual storage location may be difficult to find. The warning that the rear seat is the safest place in a vehicle for children is buried within bulleted text. The names on the seat and manual do not match.

Combination

Evenflo Chase Plus

22–120 lb · up to 57" · model 30712360

Forward-Facing ★★★★★ 22–40 lb, to 50" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • A headhugger or body pillow blocks harness slots from being visible. The harness must be rethreaded to adjust for the child's growth as well as to reassemble after cleaning the car seat. To convert the seat to this mode of use, the user may need to refer to the manual as there are multiple complicated steps. There are no illustrations on the label to guide the user through conversion. When disassembling for cleaning, mandatory parts may become loose and could be misplaced.
  • Supplemental sizing information is given in text only (not illustrated). The tether is not labeled on the diagrams showing acceptable methods of installation. The belt path is not clearly labeled. There is no indication of proper harness height on the labeling. Labels do not explain how to use LATCH or the tether strap.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. Storage systems for the LATCH attachments and tether strap exist but may be overlooked.
  • The instruction manual was not attached to the car seat when it was removed from its packaging. The instruction manual storage location may be difficult to find and cannot be accessed when the car seat is installed. There is not an overview of acceptable methods of installation provided in the manual.
Booster ★★★★★ 40–120 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • To convert the seat to this mode of use, the user may need to refer to the manual as there are multiple complicated steps. There are no illustrations on the label to guide the user through conversion. When disassembling for cleaning, mandatory parts may become loose and could be misplaced.
  • Supplemental sizing information is given in text only (not illustrated). The warning against using a lap-only belt does not explicitly state that a lap-only belt may not be used.
  • The shoulder belt guide may allow unintentional slack to develop in the seat belt.
  • The instruction manual storage location may be difficult to find and cannot be accessed when a child is secured in the booster seat.

Infant

Evenflo NurtureMax

4–22 lb · up to 29" · model 36412348

Rear-Facing ★★★★★ 4–22 lb, to 29" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not set for the smallest occupant when it was removed from packaging. Harness buckle tongues must be held together to insert into the buckle. The harness must be rethreaded to adjust for the child's growth as well as to reassemble after cleaning the car seat. When adjusting the harness or disassembling for cleaning, important parts may become loose and could be misplaced.
  • Supplemental sizing information is given in text only (not illustrated). The belt routing path is not labeled on the base, and it is obscured by seat padding on the carrier for carrier-only installation.
  • There is a line printed on the seat that must be leveled to ground. There are fewer than 3 levels of recline available. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage system for the LATCH attachments exists but may be overlooked. There is no label showing where to put the car seat's carry handle during travel in the vehicle.
  • The instruction manual was not attached to the car seat when it was removed from its packaging. The instruction manual storage location may be difficult to find and use, and it cannot be accessed when the car seat is installed. The instruction manual may fall off of the carrier, and there is no storage location in the base. The illustration showing a completed LATCH installation is not labeled in the instruction manual. Instructions showing how to prepare LATCH attachments for use are missing from the instruction manual.

Convertible

Evenflo Sonus 65

5–65 lb · up to 50" · model 34812023

Rear-facing ★★★★★ 5–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled when it was removed from its packaging. The seat was not set for the smallest occupant when removed from the packaging. The harness must be rethreaded to adjust for the child's growth. Loose pieces are generated when adjusting for child growth. To convert this seat to rear-facing mode from another mode of use, multiple actions are required, but they are simple. There are no illustrations on the seat depicting the conversion to rear-facing mode. The flexible LATCH belt must be rerouted in order to convert the seat to rear-facing mode. The harness must be rethreaded when reassembling the car seat after cleaning. Loose parts are generated when the seat is disassembled for cleaning.
  • There is not a full picture of a child properly restrained in the child safety directly next to the sizing information on the label. Supplemental sizing information is missing from the labels. No indication of correct harness height is given on the labels. There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain the use of LATCH in detail. The labels do not remind the user to tighten the LATCH belt.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. The user may need to move the seat padding in order to route the LATCH belt or seat belt. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. A printed/molded line is present on the restraint that must be leveled to the ground. There are fewer than three levels of recline for this mode of use. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The owner's manual was not attached to the seat when it was removed from its packaging. The instruction manual storage location may be difficult to find and use. The section describing vehicle seat belt types is incomplete and may be missing important information. The manual doesn't show how to remove LATCH attachments from storage.
Forward-facing ★★★★★ 22–65 lb, to 50" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant when removed from the packaging. The harness must be rethreaded to adjust for the child's growth. Loose pieces are generated when adjusting for child growth. To convert this seat to forward-facing mode from another mode of use, multiple actions are required, but they are simple. There are no illustrations on the seat depicting the conversion to forward-facing mode. The flexible LATCH belt must be rerouted in order to convert the seat to forward-facing mode. The harness must be rethreaded when reassembling the car seat after cleaning. Loose parts are generated when the seat is disassembled for cleaning.
  • There is not a full picture of a child properly restrained in the child safety directly next to the sizing information on the label. Supplemental sizing information is missing from the labels. No indication of correct harness height is given on the labels. There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain the use of LATCH in detail. The labels do not remind the user to tighten the LATCH belt. The labels do not show how to prepare the tether for use. The labels do not show how to remove the tether.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The instruction manual storage may be difficult to find and use. The tether is not labeled in the illustrations depicting acceptable modes of installation. The warning that the safest place for children is the rear seat is buried within text. The section describing vehicle seat belt types is incomplete and may be missing important information. The user must read text to properly route the seat belt through the belt path. The user must read text to properly use the tether. The tether was stored and the illustrations in the manual do not show how to remove the tether from its storage location.

Convertible

Graco Admiral 65

5–65 lb · up to 49" · model 2095096

Rear-Facing ★★★★★ 5–40 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path. When reassembling the seat after cleaning, the harness system needs to be rethreaded into the seat.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. In the diagram showing methods of installation for this mode of use, the car seat is not depicted in a vehicle seat. Labels do not explain how to use LATCH.
  • Interference is possible between a seat component and the seat belt when routing for installation. There are fewer than 3 levels of recline for use in this mode. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle.
  • The instruction manual storage location may be difficult to find. A complete illustration of a child in the car seat is not located next to height/weight sizing information.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path. When reassembling the seat after cleaning, the harness system needs to be rethreaded into the seat.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. In the diagram showing methods of installation for this mode of use, the car seat is not depicted in a vehicle seat. Labels do not explain how to use LATCH or the tether strap.
  • Interference is possible between a seat component and the seat belt when routing for installation. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the seat is installed. A complete illustration of a child in the car seat is not located next to height/weight sizing information. The tether is not labeled in the illustrations depicting acceptable modes of installation.

Booster

Graco Backless Turbobooster

40–100 lb · up to 57" · model 1823382

Booster ★★★★★ 40–100 lb, to 57" · No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled when it was removed from its packaging, and tools are required for assembly.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. The belt routing path is not completely labeled. The warning against using a lap-only belt is not illustrated.
  • The shoulder belt guide requires two hands to use, but the action is simple.
  • The instruction manual storage location may be difficult to find, and it cannot be accessed while the child is secured in the seat.

Booster

hiccapop uberboost

40–110 lb · up to 62" · model n/a

Booster ★★★★★ 40–110 lb, to 62" · No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat is not fully ready-to-use when it is removed from the packaging; it must first be inflated.
  • Supplemental sizing information is missing from the labels. The belt routing path is not completely labeled. The warning against using a lap-only belt is not illustrated and does not explicitly state that a lap-only belt may not be used.
  • The shoulder belt guide requires two hands to use, but the action is simple.
  • The instruction manual storage location may be difficult to find and use. A complete illustration of a child in the car seat is not located next to height/weight sizing information. Supplemental sizing information is not given in the manual. There is no warning indicating that the safest place in a vehicle for children is the rear seat. A warning against using a lap-only belt is not given in the seat belt routing/usage section.

Booster

Joie Basil 2-in-1

40–120 lb · up to 60" · model C1220FACRS900

Booster ★★★★★ 40–120 lb, to 60" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled when it was removed from its packaging. The seat was not set for the smallest occupant when removed from the packaging. There are no illustrations on the car seat showing how to convert the booster from highback mode to no-back mode. Loose parts are generated when the seat is disassembled for cleaning.
  • The warning against using a lap-only belt does not have an illustration, it is in text only.
  • The shoulder belt positioning device requires the use of two hands, but the action of positioning is simple.
  • The instruction manual storage location cannot be accessed while the child is seated in the seat. No supplemental sizing information beyond the minimum/maximum heights/weights is given in the owner's manual. The indication that the safest place in the vehicle for children is the rear seat is buried within a bulleted list. The warning that the safest place for children is the rear seat is not illustrated. In the section detailing proper belt routing, the car seat is not depicted in a vehicle seat in the illustrations.

All-in-One

Joie Saffron SI

4–120 lb · up to 60" · model C2401AADOV900

Rear-facing ★★★★★ 4–40 lb, to 43" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness clip is not labeled to indicate where it should be placed relative to the child's body. To convert the seat to this mode of use, the user may need to refer to the manual; There are many complicated steps. There are no illustrations on the car seat to show the conversion from other modes of use, and the flexible LATCH belt must be rerouted. Loose parts may be generated when disassembling for cleaning.
  • The labels do not contain LATCH preparation illustrations. The labels may not explain the use of the LATCH.
  • The caregiver may need to move padding to route the seat belt or LATCH strap. The belt path does not accommodate a 95th percentile male hand. Interference is possible between a seat component and the seat belt or lower anchor strap when routing for installation. LATCH attachments have buttons to depress for removal. The storage system maybe easily overlooked as it is not clearly labeled. The recline indicator is a level to ground line.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information. The indication that the safest place in the vehicle for children is the rear seat is buried within a bulleted list.
Forward-facing ★★★★★ 30–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness clip is not labeled to indicate where it should be placed relative to the child's body. To convert the seat to this mode of use, the user may need to refer to the manual; There are many complicated steps. There are no illustrations on the car seat to show the conversion from other modes of use, and the flexible LATCH belt must be rerouted. Loose parts may be generated when disassembling for cleaning.
  • The labels do not contain LATCH preparation illustrations. The labels may not explain the use of the LATCH.
  • The caregiver may need to move padding to route the seat belt or LATCH strap. The car seat lock-off is simple to use, but the user must read the manual. LATCH attachments have buttons to depress for removal.
  • Manual cannot be accessed while the car seat is installed in this mode. There is not a full picture of a child properly restrained in the child seat directly next to sizing information. The indication that the safest place in the vehicle for children is the rear seat is buried within a bulleted list.
Booster ★★★★★ 40–120 lb, to 60" · Booster
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • To convert the seat to this mode of use, the user may need to refer to the manual; There are many complicated steps. There are no illustrations on the car seat to show the conversion from other modes of use, and the flexible LATCH belt must be rerouted. Loose parts may be generated when disassembling for cleaning.
  • The belt path is only labeled on one side.
  • The shoulder belt positioning device requires the use of two hands, but the action of positioning is simple.
  • There is no illustration displaying a warning against using a lap belt only. While the CRS is in this mode, the manual cannot be accessed. No complete illustration of a child in the car seat is shown next to height/weight information. The indication that the safest place in the vehicle for children is the rear seat is buried within a bulleted list. There is no illustration displaying a warning against using a lap belt only.

All-in-One

Maxi-Cosi Pria All in One

4–100 lb · up to 52" · model CC244-FYD

Rear-Facing ★★★★★ 4–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the car seat label showing how to convert to this mode of use from other modes.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from labels. There is no indication of proper harness height on the labeling. The belt path is only labeled on one side. Labels do not explain how to use LATCH.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. There is a line printed on the seat that must be leveled to ground. There are fewer than 3 levels of recline for use in this mode. LATCH attachments have buttons to depress for removal. The storage system for the LATCH attachments exists but may be overlooked.
  • The instruction manual was not attached to the car seat when it was removed from its packaging. The instruction manual storage location may be difficult to find. A complete illustration of a child in the car seat is not located enxt to height/weight sizing information.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the car seat label showing how to convert to this mode of use from other modes.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. There is no indication of proper harness height on the labeling. The belt path is only labeled on one side. Labels do not explain how to use LATCH. Labels do not show how to remove the tether from storage.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. LATCH attachments have buttons to depress for removal. The storage systems for the LATCH attachments and/or tether strap exist but may be overlooked.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the seat is installed. A complete illustration of a child in the car seat is not located next to height/weight sizing information.
Booster ★★★★★ 40–100 lb, to 52" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There is no text on the car seat to indicate that the harness must be stored. There are numerous steps to store the harness.
  • Supplemental sizing information is missing from labels. The belt routing path is not completely labeled.
  • The shoulder belt guide may allow unintentional slack to occur in the seat belt.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the seat is installed.

Convertible

Maxi-Cosi Romi

5–40 lb · up to 43" · model CC228-FNA

Rear-Facing ★★★★★ 5–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not set for the smallest possible occupant when it was removed from its packaging. A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust for the child's growth as well as to reassemble after cleaning the car seat. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the car seat label showing how to convert to this mode of use from another mode.
  • Labels do not explain how to use LATCH.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. There is a line printed on the seat that must be leveled to ground. There are fewer than 3 levels of recline for use in this mode. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle.
  • The instruction manual can fall out from under the seat pad if stored as shown in the manual. The LATCH attachments arrived stored, and the directions do not show how to remove them from storage.
Forward-Facing ★★★★★ 22–40 lb, to 43" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • A headhugger or body pillow blocks harness slots from being visible. The harness must be rethreaded to adjust for the child's growth as well as to reassemble after cleaning the car seat. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the car seat label showing how to convert to this mode of use from another mode.
  • The belt routing path is only labeled on one side. Labels do not explain how to use LATCH or the tether strap.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle.
  • The instruction manual can fall out from under the seat pad if stored as shown in the manual. The LATCH attachments arrived stored, and the directions do not show how to remove them from storage.

Convertible

Nuna rava

5–65 lb · up to 49" · model CS05103CVR

Rear-Facing ★★★★★ 5–50 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness clip itself is not labeled, but there is a label on the seat showing where to position it on the child. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the car seat label showing how to convert to this mode of use from other modes.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from labels. The belt routing path labeling on the exterior is not clear. Portions of the belt routing path labeling are obscured by the seat pad. Labels do not explain how to use LATCH.
  • The user may need to move the seat padding in order to route the belt. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. There is nothing on the seat that provides immediate feedback to the user regarding ideal installation angle. LATCH attachments have buttons to depress for removal. The storage system for the LATCH attachments exists but may be overlooked.
  • A complete illustration of a child in the car seat is not located next to height/weight sizing information. Instructions for determining seat belt types are present but are incomplete.
Forward-Facing ★★★★★ 25–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness clip itself is not labeled, but there is a label on the seat showing where to position it on the child. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the car seat label showing how to convert to this mode of use from other modes.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from labels. The belt routing path labeling on the exterior is not clear. Portions of the belt routing path labeling are obscured by the seat pad. Labels do not explain how to use LATCH or the tether strap.
  • The user may need to move the seat padding in order to route the belt. LATCH attachments have buttons to depress for removal. The storage systems for the LATCH attachments and/or tether strap exist but may be overlooked.
  • The instruction manual cannot be accessed when the car seat is installed. A complete illustration of a child in the car seat is not located next to height/weight sizing information. The tether is not labeled in the illustrations depicting acceptable modes of installation. Instructions for determining seat belt types are present but are incomplete.

Booster

Peg Perego Viaggio 120 HBB

40–120 lb · up to 57" · model IMVI01US35DX13DP53

Booster ★★★★★ 40–120 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The CRS was not fully assembled when removed from the packaging. The conversion from high back to low back is simple, but there are no illustrations on the label.
  • The additional sizing information is provided in text only. The illustration is not next to the sizing information. The belt routing path is not labeled, but the path does have a contrasting color. There is no illustration indicating lap belt only. The warning is provided in text only.
  • The shoulder belt movement may be restricted by the belt-positioning device and may create slack.
  • The manual storage system is obvious and easy to use, but the manual cannot be accessed. There is no illustration of a child in the CRS. The additional sizing information is provided in text only. The indication of the safest place for a child is buried in the text and is not illustrated. The lap belt warning is not illustrated. The no lap belt warning is not found in the routing the lap/shoulder belt section. The mention of the one-inch rule is only found in the highback section of the manual.

Booster

Peg Perego Viaggio Flex 120

40–120 lb · up to 63" · model IMVF00US35DX13DX79

Booster ★★★★★ 40–120 lb, to 63" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When disassembling for cleaning, important parts may become loose and could be misplaced.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. The seat belt path is not clearly labeled. The warning against using a lap-only belt is not illustrated.
  • The instruction manual was attached in a hard-to-find place when the car seat was removed from its packaging. The instruction manual storage location may be difficult to find and use, and it cannot be accessed when the car seat is installed. A complete illustration of a child in the car seat is not located next to height/weight sizing information. The warning that the rear seat is the safest place in a vehicle for children is located amongst other warnings. The warning against using a lap-only belt to secure a child in this booster seat is not located in the belt routing section.

Booster

Peg Perego Viaggio Shuttle 120

40–120 lb · up to 63" · model IMVS00US35BL13DX13

Booster ★★★★★ 40–120 lb, to 63" · No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When disassembling for cleaning, important parts may become loose and could be misplaced.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. The seat belt path is not completely labeled. The warning against using a lap-only belt is not illustrated.
  • It is simple to position the shoulder belt using the belt guide, but it may require two hands.
  • The instruction manual storage location may be difficult to find or cannot be accessed when the car seat is installed. A complete illustration of a child in the car seat is not located next to height/weight sizing information. Supplemental sizing information is given in text only. The warning that the rear seat is the safest place in a vehicle for children is located amongst other warnings. The warning against using a lap-only belt to secure a child in this booster seat is not located in the belt routing section.

Booster

Peg Perego Viaggio Shuttle Plus 120

40–120 lb · up to 63" · model IMVS01US35DP53DX13

Booster ★★★★★ 40–120 lb, to 63" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When disassembling for cleaning, important parts may become loose and could be misplaced.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. The two diagrams showing methods of installation for this seat (highback and no back) are not labeled. The seat belt path is not completely labeled. The warning against using a lap-only belt is not illustrated.
  • The instruction manual was attached in a hard-to-find place when the car seat was removed from its packaging. The instruction manual storage location may be difficult to find and use, and it cannot be accessed when the car seat is installed. A complete illustration of a child in the car seat is not located next to height/weight sizing information. Supplemental sizing information is given in text only. The warning that the rear seat is the safest place in a vehicle for children is not illustrated and is located amongst other warnings. The warning against using a lap-only belt to secure a child in this booster seat is not located in the belt routing section.

Combination

Safety 1st Boost & Go 3 in 1

30–100 lb · up to 57" · model BC163-HTJ

Forward-facing ★★★★★ 30–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled when it was removed from its packaging. The car seat was not fully assembled when it was removed from its packaging. When converting to this mode of use, there are multiple complicated steps to follow that must be followed in the manual. Loose parts are generated when the seat is disassembled for cleaning.
  • There is not a full picture of a child properly restrained in the child safety directly next to the sizing information on the label. Supplemental sizing information is missing from the labels. No indication of correct harness height is given on the labels. The belt routing path is not completely labeled. There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain the use of LATCH in detail.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. The user may need to move the seat padding in order to route the LATCH belt or seat belt. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The owner's manual was not attached to the seat when it was removed from its packaging. The instruction manual storage location may be difficult to find. The instruction manual storage location may be difficulat to use. The names on the seat label does not match between the written instructions.
Booster ★★★★★ 40–100 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled when it was removed from its packaging. The car seat was not fully assembled when it was removed from its packaging. When converting to this mode of use, there are multiple complicated steps to follow that must be followed in the manual. Loose parts are generated when the seat is disassembled for cleaning.
  • Supplemental sizing information is missing from the labels. Seat belt path labeling is not in contrasting colors and may be difficult to see. The belt routing path is not completely labeled.
  • The shoulder belt guide may allow unintentional slack to occur in the seat belt.
  • The instruction manual storage location may be difficult to find. The instruction manual storage location may be difficult to use. The names on the seat label does not match between the written instructions.

Combination

Safety 1st Grand 2-in-1

30–120 lb · up to 57" · model BC149-EZA

Forward-Facing ★★★★★ 30–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning. There are no illustrations given on the car seat to show conversion to this mode from another mode of use, and the harness must be rethreaded into the seat. Loose parts may be generated when disassembling for cleaning.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. There is no indication of correct harness height relative to the child on the labels. Labels do not explain the use of LATCH.
  • Interference is possible between a seat component and the seat belt when routing for installation. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location(s) for the LATCH belt and/or tether strap are not obvious and may be overlooked.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the child is secured in the seat. No complete illustration of a child in the car seat is shown next to height/weight information. Lap-belt-only usage instructions are not given separately in the belt routing section.
Booster ★★★★★ 40–120 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations given on the car seat to show conversion to this mode from another mode of use, and the harness must be completely removed from the seat.
  • Supplemental sizing information is missing from the labels. In the diagram showing methods of installation for this mode of use, the car seat is not depicted in a vehicle seat. The seat belt path is not completely labeled.
  • The shoulder belt positioning device requires the use of two hands, but the action of positioning is simple. The shoulder belt guide may allow unintentional slack to occur in the seat belt.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the child is secured in the seat.

All-in-One

Safety 1st Grow and Go

5–100 lb · up to 52" · model CC138-DWVH

Rear-Facing ★★★★★ 5–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not set for the smallest possible occupant when the car seat was removed from its packaging. A headhugger or body pillow blocks harness slots from being visible. In order to use the lowest harness height, the harness must be rethreaded. The harness must also be rethreaded after cleaning the padding if using the lowest harness slot. When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the car seat label showing how to convert to this mode of use from other modes.
  • Supplemental sizing information is missing from the labels. There is no indication of proper harness height on the labeling. The belt path is only labeled on one side. Labels do not explain how to use LATCH.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. There is a line printed on the seat that must be leveled to ground. There are fewer than 3 levels of recline for use in this mode. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage system for the LATCH attachments exists but may be overlooked.
  • The instruction manual was not attached to the car seat when it was removed from its packaging. The instruction manual storage location may be difficult to find and use. The LATCH attachments arrive stored and the instruction manual doesn't show how to remove them.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the car seat label showing how to convert to this mode of use from other modes.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. There is no indication of proper harness height on the labeling. Labels do not explain how to use LATCH. Labels do not show how to remove the tether from storage.
  • Interference is possible between the vehicle seat belt or LATCH belt and a seat component. LATCH attachments have buttons to depress for removal. The storage systems for the LATCH attachments and/or tether strap exist but may be overlooked.
  • The instruction manual storage location may be difficult to find and use, and it cannot be accessed while the car seat is installed. The LATCH attachments arrive stored and the instruction manual doesn't show how to remove them. The user might need to read text given in the instruction manual to use the tether.
Booster ★★★★★ 40–100 lb, to 52" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There is no text on the car seat to indicate that the harness must be stored. There are numerous steps to store the harness.
  • Supplemental sizing information is missing from labels. The shoulder portion of the belt routing path is not labeled.
  • The shoulder belt guide may allow unintentional slack to occur in the seat belt.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the seat is installed.

All-in-One

Safety 1st Grow and Go sprint Crosstown DLX

5–100 lb · up to 52" · model CC284HGP

Rear-facing ★★★★★ 5–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat is not set for the smallest occupant when it was removed from packaging. A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth. To convert this seat to rear-facing mode from another mode of use, multiple actions are required, but they are simple. The flexible LATCH belt must be rerouted in order to convert the seat to rear-facing mode. Loose parts are generated when the seat is disassembled for cleaning.
  • Supplemental sizing information is missing from the labels. Additional information about how the harness straps should fit on the shoulders is given in text only on the labeling. No indication of correct harness height is given on the labels. The belt routing path is sufficiently labeled on only one side. There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain the use of LATCH in detail. The labels do not remind the user to tighten the LATCH belt.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. A printed/molded line is present on the restraint that must be leveled to the ground. There are fewer than three levels of recline for this mode of use.
  • The instruction manual storage may be difficult to find. The section describing vehicle seat belt types is incomplete and may be missing important information.
Forward-facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • To convert this seat to forward -facing mode from another mode of use, multiple actions are required, but they are simple. The flexible LATCH belt must be rerouted in order to convert the seat to forward-facing mode. Loose parts are generated when the seat is disassembled for cleaning.
  • Supplemental sizing information is given in text only on the labels (not illustrated). No indication of correct harness height is given on the labels. There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain the use of LATCH in detail. The labels do not remind the user to tighten the LATCH belt. The labels do not explain how to remove the tether strap from storage.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. The user may need to move the seat padding in order to route the LATCH belt or seat belt. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The manual cannot be accessed while the car seat is installed in this mode. The instruction manual storage location may be difficult to find. The section describing vehicle seat belt types is incomplete and may be missing important information. The user must read text alongside an illustration to prepare LATCH attachments for use.
Booster ★★★★★ 40–100 lb, to 52" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • To convert this seat to booster seat from another mode of use, multiple actions are required, but they are simple. There are no illustrations on the seat depicting the conversion to booster mode. Loose parts are generated when the seat is disassembled for cleaning.
  • Supplemental sizing information is missing from the labels. There are diagrams of the various methods of installation for this mode on the labels, but they do not depict the car seat in a vehicle seat. The vehicle seat belt routing path is not completely labeled
  • The shoulder belt may slip out of the shoulder belt positioning device. The shoulder belt guide may allow unintentional slack to occur in the seat belt.
  • The manual cannot be accessed while the car seat is installed in this mode. The instruction manual storage location may be difficult to find. In the section detailing proper belt routing, the car seat is not depicted in a vehicle seat in the illustrations.

Convertible

Safety 1st Jive 2-in-1

5–65 lb · up to 49" · model CC267-DWV

Rear-Facing ★★★★★ 5–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant when removed from the packaging. A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning. There are no illustrations given on the car seat to show conversion to this mode from another mode of use, and the flexible LATCH belt must be rerouted. Loose parts may be generated when disassembling for cleaning.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. There is no indication of correct harness height relative to the child on the labels. Labels do not explain the use of LATCH.
  • Interference is possible between a seat component and the seat belt when routing for installation. There are fewer than three levels of recline for this mode of use. There is a line printed on the seat that must be leveled to ground. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The owner's manual was not attached to the car seat when it was removed from its packaging. The owner's manual storage location may be difficult to find. No complete illustration of a child in the car seat is shown next to height/weight information.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning. There are no illustrations given on the car seat to show conversion to this mode from another mode of use, and the flexible LATCH belt must be rerouted. Loose parts may be generated when disassembling for cleaning.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. There is no indication of correct harness height relative to the child on the labels. The seat belt path is only labeled in contrasting text on one side. Labels do not explain the use of LATCH.
  • Interference is possible between a seat component and the seat belt when routing for installation. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location(s) for the LATCH belt and/or tether strap are not obvious and may be overlooked.
  • The instruction manual storage location may be difficult to find and cannot be accessed while the child is secured in the seat. No complete illustration of a child in the car seat is shown next to height/weight information. Lap-belt-only usage instructions are not given separately in the belt routing section.

Infant

Safety 1st onBoard Insta-LATCH DLX

4–30 lb · up to 32" · model IC390HHC

Rear-facing ★★★★★ 4–30 lb, to 32" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The CRS was not set to the youngest mode when removed from the packaging. A headhugger or body pillow blocks the harness slots from being visible. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning.
  • The belt path is not labeled and is not in contrasting colors. The LATCH illustrations are unclear. There are no illustrations on the seat showing how to prepare LATCH for use.
  • The recline indicator is a level to ground line, and there are less than 3 levels of recline. The LATCH storage system is not clearly labeled.
  • The instruction manual was attached in a hard-to-find place when the car seat was removed from its packaging. The manual storage may be difficult to find and use, and may fall out of the carrier. The section describing vehicle seat belt types is incomplete and may be missing important information.

All-in-One

Safety 1st Slim Ride Ever Slim

5–100 lb · up to 57" · model CC381HDE

Rear-facing ★★★★★ 5–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat is not set for the smallest occupant when it was removed from packaging. The harness clip is not labeled to indicate where it should be placed relative to the child's body. There are no illustrations on the seat depicting the conversion to rear-facing mode. The flexible LATCH belt must be rerouted in order to convert the seat to forward-facing mode. Loose parts are generated when the seat is disassembled for cleaning.
  • The full picture of a child properly restrained in the child seat is not directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. No indication of correct harness height is given on the labels. There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain the use of LATCH in detail. The labels do not remind the user to tighten the LATCH belt.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. The user may need to move the seat padding in order to route the LATCH belt or seat belt. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. A printed/molded line is present on the restraint that must be leveled to the ground. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The owner's manual was not attached to the seat when it was removed from its packaging. The manual cannot be accessed while the car seat is installed in this mode. The instruction manual storage location may be difficult to find. The section describing vehicle seat belt types is incomplete and may be missing important information. The user must read text in order to route the LATCH strap.
Forward-facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness clip is not labeled to indicate where it should be placed relative to the child's body. To convert this seat to forward-facing from another mode of use, multiple actions are required, but they are simple. The flexible LATCH belt must be rerouted in order to convert the seat to forward-facing mode. Loose parts are generated when the seat is disassembled for cleaning.
  • The full picture of a child properly restrained in the child seat is not directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. No indication of correct harness height is given on the labels. There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain the use of LATCH in detail. The labels do not remind the user to tighten the LATCH belt. The labels do not explain how to remove the tether strap from storage.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The manual cannot be accessed while the car seat is installed in this mode. The instruction manual storage location may be difficult to find. The section describing vehicle seat belt types is incomplete and may be missing important information. The user must read text in order to route the LATCH strap. The tether is initially stored and the owner's manual does not illustrate removal from the storage location.
Booster ★★★★★ 40–100 lb, to 57" · Highback/No Back
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat is not set for the smallest occupant when it was removed from packaging. To convert this seat to booster seat from another mode of use, multiple actions are required, but they are simple. There are no illustrations on the seat depicting the conversion to booster mode. There are no illustrations showing how to convert this seat from high back mode to low back mode. Loose parts are generated when the seat is disassembled for cleaning.
  • Supplemental sizing information is missing from the labels. The belt routing path is only labeled on one side of the car seat.
  • The manual cannot be accessed while the car seat is installed in this mode. The instruction manual storage location may be difficult to find.

All-in-One

Safety 1st TriFit

5–100 lb · up to 52" · model CC318-HAK

Rear-facing ★★★★★ 5–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat is not set for the smallest occupant when it was removed from packaging. There are no illustrations on the seat depicting the conversion to rear-facing mode. When converting to this mode of use, there are multiple complicated steps to follow that must be followed in the manual. The flexible LATCH belt must be rerouted in order to convert the seat to rear-facing mode. Loose parts are generated when the seat is disassembled for cleaning.
  • There is not a full picture of a child properly restrained in the child safety directly next to the sizing information on the label. Supplemental sizing information is missing from the labels. No indication of correct harness height is given on the labels. There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain the use of LATCH in detail. The labels do not remind the user to tighten the LATCH belt. The labels were already peeling when the restraint was removed from its packaging.
  • The user may need to move the seat padding in order to route the LATCH belt or seat belt. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. A printed/molded line is present on the restraint that must be leveled to the ground. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The owner's manual was not attached to the seat when it was removed from its packaging. The manual cannot be accessed while the car seat is installed in this mode. The instruction manual storage location may be difficult to find. The section describing vehicle seat belt types is incomplete and may be missing important information.
Forward-facing ★★★★★ 30–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations on the seat depicting the conversion to forward-facing mode. When converting to this mode of use, there are multiple complicated steps to follow that must be followed in the manual. The flexible LATCH belt must be rerouted in order to convert the seat to forward-facing mode. Loose parts are generated when the seat is disassembled for cleaning.
  • There is not a full picture of a child properly restrained in the child safety directly next to the sizing information on the label. Supplemental sizing information is missing from the labels. No indication of correct harness height is given on the labels. There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain the use of LATCH in detail. The labels do not remind the user to tighten the LATCH belt. The labels do not explain how to remove the tether strap from storage.
  • The user may need to move the seat padding in order to route the LATCH belt or seat belt. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The manual cannot be accessed while the car seat is installed in this mode. The instruction manual storage location may be difficult to find. The user must read text in order to route the seat belt. The user must read text in order to route the LATCH strap.
Booster ★★★★★ 40–100 lb, to 52" · highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat is not set for the smallest occupant when it was removed from packaging. There are no illustrations on the seat depicting the conversion to booster mode. When converting to this mode of use, there are multiple complicated steps to follow that must be followed in the manual. When converting to this mode of use after using as a booster for an older child, the harness must be rethreaded into the seat. Loose parts are generated when the seat is disassembled for cleaning.
  • Supplemental sizing information is missing from the labels. The belt routing path labeling is not contrasting from the car seat shell. The belt routing path is not completely labeled.
  • The manual cannot be accessed while the car seat is installed in this mode. The instruction manual storage location may be difficult to find.

All-in-One

Safety 1st Trimate

5–100 lb · up to 52" · model CC342-HAS

Rear-Facing ★★★★★ 5–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The CRS was not set to the youngest mode when removed from the packaging. The crotch buckle was found in the middle slot. The harness tightening may be difficult when the CRS is installed. The user must rethread the harness to adjust for the child's growth, as well as after cleaning the padding. When converting to this mode of use, the flexible LATCH belt must be rerouted. There are no illustrations on the label to guide the user through the conversion. Converting the CRS may require complicated steps; the user must refer to the manual.
  • There is no full picture of a child properly restrained in the child seat. Supplemental sizing information is provided in text only. The label does not indicate the harness slot height. The labels do not explain LATCH use. The label does not remind the user to tighten the LATCH. The labels were peeling when the CRS was removed from the box.
  • The padding may need to be moved in order to route the belt. As stated in the manual, there are only two recline positions for rear-facing mode. However, there is no label on the seat to illustrate which recline level to use. The car seat is equipped with hook-style LATCH attachments, which may require twisting to remove from the lower anchors in the vehicle. A storage system for the LATCH attachments exists, but it may be overlooked.
  • The instruction manual may not be attached to the seat when removed from the box. The manual may be difficult to access in this mode. The illustration may not show the CRS in a vehicle seat. Instructions for using the lap-only belt is missing or may not be clearly indicated in the directions. The user must read the text to route the belt and LATCH. The instruction manual may not have a reference page number for additional information on lower attachment storage.
Forward-Facing ★★★★★ 22–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • There are no illustrations on the label to guide the user through the forward-facing conversion. To convert the seat to this mode of use, the user may need to refer to the manual, as there are multiple complicated steps. The user must rethread the harness to adjust for the child's growth. When converting to this mode of use, the flexible LATCH belt must be rerouted.
  • There is no full picture of a child properly restrained in the child seat. Supplemental sizing information was not provided. There is no indication of proper harness slot height on the labeling. The LATCH instructions on the labels may be text-heavy. The labels do not contain LATCH preparation illustrations. The labels may not explain the use of the LATCH. The labels do not remind the user to tighten the LATCH. The labels do not show how to remove the tether.
  • There may be interference when the harness slots are in the lowest position and the harness is loose. The lower anchors require twisting to be removed from the vehicle. The storage system for the tether and lower anchors may not be clearly labeled.
  • The instruction manual may not be attached to the seat when removed from the box. The manual may be difficult to access in this mode. The manual storage may be difficult to find. The lap belt and shoulder belts are referred to as "vehicle belts" instead of being labeled individually. The LATCH and tether instructions may be text-heavy. The user must read the text to route the LATCH and use the tether.
Booster ★★★★★ 40–100 lb, to 52" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the harness must be removed from the car seat. There are no illustrations on the label to guide the user through the conversion; the user must refer to the manual.
  • Supplemental sizing information was not provided. Must read labels to install the CRS. The belt routing path may not be labeled for this mode.
  • The instruction manual was not attached to the seat when removed from the box. The manual was found tucked behind the harness. It may be difficult to access the manual in this mode. The illustration does not show the CRS in a vehicle seat. The user must read the text for lap and shoulder belt installation. The lap and shoulder belts do not appear to be labeled. The illustrations imply that the seat needs to be belted when not in use. There is no illustration displaying a warning against using a lap belt only. The lap belt warning is found in the seatbelt section of the manual, not in the booster mode section.

Booster

Uppababy Alta V2

40–100 lb · up to 57" · model 1320-ALT-US-JKE

Booster ★★★★★ 40–100 lb, to 57" · Highback
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The car seat was not fully assembled when it was removed from its packaging.
  • There is not a full picture of a child properly restrained in the child safety directly next to the sizing information on the label. The belt routing path is not completely labeled. The label warning against using a lap-only belt is not illustrated on the seat (given in text only).
  • The manual cannot be accessed while the car seat is installed in this mode and the child is in the car seat. No complete illustration of a child in the CRS is shown next to height/weight information. The warning that the safest place for children is the rear seat is buried within text. The warning that the safest place for children is the rear seat is not illustrated. There is no warning against using a lap-only belt in the belt routing section.

Convertible

UPPAbaby Knox

14–65 lb · up to 49" · model 1120-KNX-US-LCA

Rear-Facing ★★★★★ 14–45 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the car seat label showing how to convert to this mode of use from other modes.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. In the diagram showing methods of installation for this mode of use, the car seat is not depicted in a vehicle seat. The belt routing path is not labeled from the exterior of the car seat. Routing instructions are shown underneath the padding, and there is no indication to lift the padding on the car seat to reveal them. Labels do not explain how to use LATCH.
  • The user needs to move the seat padding in order to route the belt. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. LATCH attachments have buttons to depress for removal. The storage system for the LATCH attachments exists but may be overlooked - there is a fabric tab on the seat padding, but it is not clear to open the door to access LATCH attachments.
  • The instruction manual cannot be accessed when the car seat is installed. The fabric tab labeling the instruction manual storage area is obscured by the fit inlay. A complete illustration of a child in the car seat is not located next to height/weight sizing information. Overall finished views for each installation method are missing. The user may need to read through text in the manual to route the seat belt/LATCH belt.
Forward-Facing ★★★★★ 25–65 lb, to 49" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • When converting to this mode of use, the LATCH belt must be rerouted through the belt path. There are no illustrations on the car seat label showing how to convert to this mode of use from other modes.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. The tether is not labeled in the diagrams showing overviews of the different methods of installation. The belt routing path is not labeled from the exterior of the car seat. Routing instructions are shown underneath the padding, and there is no indication to lift the padding on the car seat to reveal them. Labels do not explain how to use LATCH or the tether strap.
  • The user needs to move the seat padding in order to route the belt. The belt lockoff may be difficult/confusing to use. LATCH attachments have buttons to depress for removal. The storage system for the LATCH attachments exists but may be overlooked - there is a fabric tab on the seat padding, but it is not clear to open the door to access LATCH attachments.
  • The instruction manual cannot be accessed when the car seat is installed. A complete illustration of a child in the car seat is not located next to height/weight sizing information. Overall finished views for each installation method are missing, The user may need to read through text in the manual to route the seat belt/LATCH belt and to use the tether strap.

Convertible

Evenflo SureRide 65

5–65 lb · up to 54" · model 37112280

Rear-Facing ★★★★★ 5–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant when removed from the packaging. The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning. To convert to this mode of use from other modes, the user must follow steps given in the manual; there are no illustrations on the car seat depicting the conversion. The LATCH belt must be rerouted to convert to this mode of use from other modes.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. There is no indication of correct harness slot height given on the labeling. The belt routing path label is contrasting on one side and molded into the plastic on the other side. Labels do not explain how to prepare or use LATCH.
  • Interference is possible between a seat component and the seat belt when routing for installation. There are fewer than three levels of recline for this mode of use. There is a line printed on the seat that must be leveled to ground. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The instruction manual was attached to the car seat in a hard-to-find location when the car seat was removed from its packaging. The instruction manual storage location may be difficult to find and use. Instructions for determining seat belt types are present but are incomplete. The LATCH attachments were stored when the car seat was removed from its packaging, and there are no directions specifically showing how to remove the attachments from storage.
Forward-Facing ★★★★★ 22–65 lb, to 54" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The harness must be rethreaded to adjust height for the child's growth as well as for reassembly after cleaning. To convert to this mode of use from other modes, the user must follow steps given in the manual; there are no illustrations on the car seat depicting the conversion. The LATCH belt must be rerouted to convert to this mode of use from other modes.
  • There is not a full picture of a child properly restrained in the child seat directly next to sizing information on the labeling. Supplemental sizing information is missing from the labels. There is no indication of correct harness slot height given on the labeling. The belt routing path label is contrasting on one side and molded into the plastic on the other side. Labels do not explain how to prepare or use LATCH or the tether strap.
  • Interference is possible between a seat component and the seat belt when routing for installation. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage locations for the LATCH bel and/or tether strap are not obvious and may be overlooked.
  • The instruction manual storage location may be difficult to find and use. Instructions for determining seat belt types are present but are incomplete. The LATCH attachments were stored when the car seat was removed from its packaging, and there are no directions specifically showing how to remove the attachments from storage.

Convertible

Evenflo Tribute

5–40 lb · up to 40" · model 38111190

Rear-Facing ★★★★★ 5–40 lb, to 37" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant when removed from the packaging. The harness must be rethreaded to adjust for the child's growth. Loose pieces are generated when adjusting for child growth. To convert this seat to rear-facing mode from another mode of use, multiple actions are required, but they are simple. There are no illustrations on the seat depicting the conversion to rear-facing mode. The flexible LATCH belt must be rerouted in order to convert the seat to rear-facing mode. The harness must be rethreaded when reassembling the car seat after cleaning. Loose parts are generated when the seat is disassembled for cleaning.
  • There is not a full picture of a child properly restrained in the child safety directly next to the sizing information on the label. Supplemental sizing information is missing from the labels. No indication of correct harness height is given on the labels. There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain the use of LATCH in detail. The labels do not remind the user to tighten the LATCH belt.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. The user may need to move the seat padding in order to route the LATCH belt or seat belt. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. A printed/molded line is present on the restraint that must be leveled to the ground. There are less than three levels of recline available for this mode of use. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The owner's manual was not attached to the seat when it was removed from its packaging. The instruction manual storage location may be difficult to find. It is possible for the manual to fall out of the storage location in the carrier and there is no storage location in the car seat base. The user must read the text to route the belt. The manual doesn't show how to remove LATCH attachments from storage.
Forward-Facing ★★★★★ 22–40 lb, to 40" · 5-pt
Instructionsn/a
Labels★★★★★
Installing in the car★★★★★
Securing the child★★★★★
  • The seat was not set for the smallest occupant when removed from the packaging. The harness must be rethreaded to adjust for the child's growth. Loose pieces are generated when adjusting for child growth. To convert this seat to forward-facing mode from another mode of use, multiple actions are required, but they are simple. There are no illustrations on the seat depicting the conversion to forward-facing mode. The flexible LATCH belt must be rerouted in order to convert the seat to forward-facing mode. The harness must be rethreaded when reassembling the car seat after cleaning. Loose parts are generated when the seat is disassembled for cleaning.
  • There is not a full picture of a child properly restrained in the child safety directly next to the sizing information on the label. Supplemental sizing information is missing from the labels. No indication of correct harness height is given on the labels. There are no illustrations on the seat showing how to prepare LATCH for use. The labels do not explain the use of LATCH in detail. The labels do not remind the user to tighten the LATCH belt. The labels do not show how to prepare the tether for use. The labels do not show how to remove the tether.
  • It may be uncomfortable for those with larger hands to route the seat belt or LATCH belt through the belt path. The user may need to move the seat padding in order to route the LATCH belt or seat belt. Interference is possible between the vehicle seat belt or LATCH belt and a seat component. The car seat is equipped with hook-style LATCH attachments which may require twisting to remove from the lower anchors in the vehicle. The storage location for the LATCH belt is not obvious and may be overlooked.
  • The instruction manual storage location may be difficult to find. The tether is not labeled in the illustrations depicting acceptable modes of installation. The warning that the safest place for children is the rear seat is buried within text. The section describing vehicle seat belt types is incomplete and may be missing important information. The user must read text to properly use the tether. The tether was stored and the illustrations in the manual do not show how to remove the tether from its storage location.

Which mode, which age

Rear-facing for as long as the seat's rear-facing limits allow, usually well past two; then forward-facing with the 5-point harness to the seat's limit, often 40–65 lb; then a belt-positioning booster until the lap belt sits on the thighs and the shoulder belt crosses the collarbone, usually between 8 and 12 years and 4'9". The back seat, always, until 13. Stage by age →

Before you buy

Check the expiry date molded into the seat (most last 6–10 years), never buy a seat that has been in a crash, and have the installation checked for free by a certified technician: NHTSA lists inspection stations by zip code. Register the seat with the maker so a recall reaches you; our recalls page lists CPSC and NHTSA child seat recalls as they are posted.

Ratings, limits and notes are NHTSA's, from its Car Seat Ease-of-Use Ratings program, fetched Nov 22, 2026; a seat not listed here has simply not been rated. We sell no car seats and earn nothing from any seat named here. Photos are NHTSA's.